What is a Pro Logic Controller?
What is a Pro Logic Controller?
Pro Logic is a scalable, flexible line of total pool management controls that suit any backyard environment. Digital display of time, day, temperature of pool / spa, and ambient air. Built-in keypad for complete operation and programming.
How do I connect my Hayward OmniLogic to WIFI?
Press the “wifi bridge” option on the right side of the screen. NOTE: The network password IS CASE SENSITIVE. To confirm connection, go to Config>Network and verify IP addresses appear under the dynamic tab. To change, select the IP address, enter new value, and select check to save.
What is Omni Direct Mode?
OMNIDIRECT MODE FEATURES. » Instant navigation to desired colors or light shows (no more cycling through every option) » Dimming capabilities (20% increments) » Speed adjustment for light shows. » Access to 10 additional colors for increased customization opportunities (special.
How do I update my Hayward OmniLogic?
You need to bring the USB memory stick to the OmniLogic and simply plug it into the side of the Local Display behind the Dead Front. Next, you will go into OmniLogic’s Configuration Menu and push Firmware Upgrade. The OmniLogic will automatically reboot with the new Firmware.
How do I update the firmware on my Hayward OmniLogic?
How does the Hayward Omnilogic work?
The OmniLogic uses a local touchscreen terminal as the main interface with the device. Once configured, the OmniLogic can be controlled remotely using various Hayward remote terminals or, when connected to the home’s network, by Internet enabled devices such as computers, tablets and phones.
Why choose ProLogic® pool automation?
ProLogic® pool automation offers the best value in the industry for a better backyard experience and more time to enjoy it. Pool owners can automate all work intensive functions such as filtration, heating, sanitization, balancing PH, and cleaning.
How do I control the Omnilogic from another device?
Once configured, the OmniLogic can be controlled remotely using various Hayward remote terminals or, when connected to the home’s network, by Internet enabled devices such as computers, tablets and phones. The local terminal must be used to access the Configuration Wizard.
How many relays can ProLogic support?
ProLogic is offered in three different models for the right level of control to suit pool owner’s needs. Manage up to 16 pieces of equipment (4, 8 or 16 Relays), two heaters and a solar system on any pool, spa or pool/spa with shared or dual equipment.
