What is corn head grease used for?

What is corn head grease used for?

Corn Head Grease is a carefully formulated lithium 12-hydroxystearate grease with oxidation, rust and corrosion inhibitors, extreme pressure (EP) additives for anti-wear and heavy shock loading, and a special polymer to control oil separation during storage.

How do you grease a 643 corn head?

Remove the plug on top of the gear box and fill with grease from the bottom till you can see it where the plug came out. Take the plug out on top (right where the ears leave the stalk rolls). Pump corn head grease into the fitting on the bottom until it comes up into the plug hole.

What is John Deere corn head grease?

FS Corn head Grease is an extreme pressure, polyurea thickened grease, formulated especially for use in corn head gear cases and most other slow moving gear box applications requiring an NLGI “0” grease. Corn head Grease will not leak from the gear case or drain from the gears during idle periods.

Can you put grease in a gearbox?

Some amount of grease can be added to an oil-lubricated gearbox to reduce lubricant leakage or noise. The grease’s consistency is primarily determined by the concentration of the thickener in the formula. An NLGI #2 grease has a higher proportion of thickener than an NLGI #00 grease.

How wide is a 612c corn head?

Key Specs

Approximate overall width 9.144 m 30 ft
Row spacings 50.8, 55.9, 69.9, 74.9, or 76.2 cm 20, 22, 27.5, 29.5, or 30 in.
Deck plate adjustment Hydraulic adjustment
Gatherer chain adjustment Spring loaded, self-adjusting

How do you get rid of deep root corns?

How to get rid of corns

  1. Soak your foot in warm water. Make sure the corn is fully submerged for about 10 minutes or until the skin softens.
  2. File the corn with a pumice stone. A pumice stone is a porous and abrasive volcanic rock that’s used for sloughing away dry skin.
  3. Apply lotion to the corn.
  4. Use corn pads.

How does salicylic acid work on corns?

Salicylic acid is a keratolytic. It belongs to the same class of drugs as aspirin (salicylates). It works by increasing the amount of moisture in the skin and dissolving the substance that causes the skin cells to stick together. This makes it easier to shed the skin cells.

What are hydraulic deck plates on corn head?

Hydraulic deck plates are in base equipment on all 600 Series Corn Heads. They allow the operator to adjust deck plate opening on-the-go in order to match changes in cob size and crop conditions. Trash intake, ear loss and pre-mature shelling are reduced by properly adjusted deck plates.

Where are Capello corn heads made?

Capello’s manufacturing plant moves to the current Via Valle Po 100 site in Cuneo, formerly home to the Celdit facility, the largest cellulose factory in Italy during the war.

author

Back to Top