What is DC04 steel?
What is DC04 steel?
DC04+ZE is an electrolytically zinc-coated cold-rolled flat steel for cold forming with a yield strength of max. 220 MPa.
What is DC04 material?
Description. Cold rolled uncoated low carbon steel narrow strip for cold forming.,The non-alloy steel DC04 acc. to DIN EN 10130 is as a deep-draw quality suitable for cold forming of complexest profile forms and components, especially at high deformation speeds (e.g. transfer presses).
What is DD steel?
D D STEELS is in the industry of Iron and Steel Mills and Ferroalloy Manufacturing.
What is the difference between DC01 and DC04?
DC01 – This grade can be used for simple forming work, for example Bending, embossing, beading and pulling are used. DC03 – This grade is suitable for forming requirements such as Deep drawing and difficult profiles suitable. DC04 – This quality is suitable for high deformation requirements.
What is EDD sheet?
This paper focuses on the formability and thickness distribution in incremental sheet forming (ISF) of extra-deep drawing steel (EDD). In ISF, the formability of the material is primarily measured by the maximum formable wall angle and maximum allowable thinning.
What is dx51 steel?
DX51D steel is highly ductile and flexible. It is used in complex dep-draught components and conforms to the BS EN 10346:2015 standard. Classification: Ductile and flexible structural steel. Product: Continuous hot-dip coated steel.
Is DC01 mild steel?
DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. Note: DIN 1623 has been replaced by DIN EN 10130, and the designation ST12 has been replaced by DC01.
What are the mechanical properties of DC04 steel?
Mechanical properties of steel DC04 (1.0338) Rm – Tensile strength (MPa) 270-350 ReH – Minimum yield strength (MPa)
What materials can be used to make DC04?
Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. DC04 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
What is the strength range of DC04?
Application of DC04: household appliances industry, construction trade Acc. to DIN EN 10139 DC04 is offered as cold rolled band or bar, cut in strength range HK270 to HK590. On welding of DC04 in condition HK290 to HK590 has to be considered the potential influence to the mechanical properties This material data has been provided by WIAM.
What is the dcdc04 number?
DC04. Number: 1.0338. Classification: Non-alloy quality steel. Standard: EN 10130: 2006 Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions. EN 10139: 1997 Cold rolled uncoated mild steel narrow strip for cold forming.
