What is F08 error?
What is F08 error?
F08 indicates that the heater is an open circuit so check the heater for continuity with a meter. F12 relates to an element short or the heater has failed completely so replace if necessary. Fault code F09 on some machines is an overflow error, which indicates that water has been found on the base of the appliance.
How do you reset a Hotpoint?
How to Reset a Hotpoint Stove
- Press the “Clear/Off” button several times until the LCD display shows the clock.
- Press “Clear/Off” until the LCD display turns off and the oven powers down.
- Disconnect the oven’s power supply at the outlet or circuit breaker and wait 60 seconds.
What does F8 mean on washer?
If the washer has an F8 E1 error or LO FL error, the lid will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximately 8 to 10 minutes, during which time the pump will run continuously.
How do I fix F06 error on a Hotpoint washing machine?
When your Hotpoint washer dryer shows error message F06, you will need to check the door area for any obstructions. Closely inspect the door lock and surrounding areas, removing anything in its way. Once you have cleared any obstructions, try to restart the machine programme.
How do I reset my Hotpoint washing machine motor?
Motor Reset Procedure:
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
What does F18 mean on a Hotpoint washing machine?
F18 — Internal data error. Issue: Some or all display / functions do not work on my washing machines. Advice: Please disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply, wait 30 seconds and try starting the machine again.
What does F mean on Whirlpool washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.
What does F08 mean on a hotpoint Ultima washing machine?
All Hotpoint washing machine models I have technical information for going back many years (including Hotpoint Ultima) state F08 as “heater relay”, or “heater relay stuck”, or “heater relay can’t be activated”. Some possible courses of action are also listed as ““check pressure switch connections for heater, wiring and module connections”.
Is there an F 08 code on a hotpoint pool pump?
Looked on Hotpoint website and they don’t list an F 08 code. Rang Hotpoint this morning, no use at all after ages on hold. All they wanted was to get an engineer out! Machine is 5 1/2 years old so just out of warranty! Checked pump filter and removed 20 p piece.
What does error code F08 mean on Indesit washing machine?
If an Indesit or Hotpoint washing machine is flashing an LED 8 times, or is displaying the error code F08, this usually indicates the following. “Heater relay can’t be activated” or “heater relay stuck”.
What does error F06 mean on my washing machine?
F06 — Door lock fault. Issue: Washing Machines door cannot be opened or closed / when the door is closed the machine the programme will not start. Advice: If your washing machines door will not close, please check for any obstructions in the door lock.
