What is the capacitance value of 103?
What is the capacitance value of 103?
If there are only two digits listed, the number is simply the capacitance in pF. Thus, the digits 22 indicate a 22 pF capacitor….In This Article.
| Marking | Capacitance (pF) | Capacitance (ìF) |
|---|---|---|
| 472 | 4,700 pF | 0.0047 ìF |
| 103 | 10,000 pF | 0.01 ìF |
| 223 | 22,000 pF | 0.022 ìF |
| 473 | 47,000 pF | 0.047 ìF |
What size is a capacitor with the mark 104 on it?
Now for an example: A capacitor marked 104 is 10 with 4 more zeros or 100,000pF which is otherwise referred to as a . 1 uF capacitor.
What does 103 written on a capacitor mean?
Capacitors will have a number on them like 103, 104, 224 . The last number represents the number of zeroes. All values are in picofarads. For example: 103 becomes 10 + 000 (3 zeroes) pF = 10000 pF = 10 nF. For example: 224 becomes 22 + 0000 (4 zeroes) pF = 220000 pF = 220 nF = .22 uF.
What is the value of capacitor 106?
So, for example, if the digits are ‘106’, this equals a capacitance value of 10μF. The first 2 digits are ’10’ and the multiplier factor is 1,000,000, so the value is 10,000,000pF or 10μF (10pF x 1,000,000= 10,000,000pF= 10μF).
What does 3 digit capacitor code 103 stand for?
Other decades: The 3 digit capacitor code 103 stands for 10 nF, in words: ten nanofarads capacitance. This is a simple online calculator for color band resistor marking, inductor color band marking, ceramic or tantalum capacitor 3 digit marking and SMD resistor 3-digit, 4-digit, 10%, 5%, 2% and EIA-96 (E96) 1% tolerance code marking.
What is the value of 100000pf on a capacitor?
The first two figures give 10 the third figure’4′ gives 0000 and the last ‘k’ = 10%. Therefore, the capacitor is 10,0000pF, 10%. This is normally expressed as 0.0luF or l00nF – capacitors with a value below 0.001uF are expressed in Picofarads.
What are the color codes for a tantalum capacitor?
Tantalum Capacitor Color Codes Color 1st Figure 2nd Figure Multiplier Voltage Black 0 1 10 Brown 1 1 10 Red 2 2 100 Orange 3 3
What do the letters in the Oluf code on a capacitor mean?
Quite often there is a single letter, indicating tolerance. The code is worked out in picofarads, so there is a chance you may have to use the appropriate multiplier. For example a capacitor may have a code ‘104k’. This decodes as OluF 10%. The first two figures give 10 the third figure’4′ gives 0000 and the last ‘k’ = 10%.
