What is the pool slam method?
What is the pool slam method?
SLAM is a pool water sanitization process that stands for Shock, Level, and Maintain — originating from the website, Trouble Free Pool. The goal of SLAMing is to add so much chlorine to the pool that it completely oxidizes all pollutants in the water – algae, bacteria, viruses, and any other organic contaminants.
How much chlorine do you need to slam a pool?
The recommended Cya level in a pool for a successful SLAM is between 30ppm and 40ppm, higher than that you will have to spend more on chlorine to be able to clear algae or ammonia.
When should I slam my pool?
SLAMing your pool is the best way to eliminate algae, sanitize your pool and get your water crystal clear. If you have algae, or the CC level is above 0.5, or the free chlorine (FC) level is zero, you should SLAM the pool.
What is Slam process?
SLAM (simultaneous localization and mapping) is a method used for autonomous vehicles that lets you build a map and localize your vehicle in that map at the same time. SLAM algorithms allow the vehicle to map out unknown environments.
What is an overnight chlorine loss test?
This test is intended to determine if your pool has a contaminant such as algae that is consuming chlorine. The test is performed by testing FC in the evening after sunset and again in the morning before sunrise.
How do I get rid of mustard algae in my pool?
Shock your pool with chlorine — twice the amount you would use for a typical shock treatment. Brush the algae aggressively, which will help the shock destroy the algae from the small crevices on the pool surface. Run the pump and filter 24-hours a day until the algae is gone.
Why does my pool lose chlorine so fast?
Maintain Proper pH Levels Your pH levels affect your chlorine levels and the ability for the chlorine to do its work properly. If your water’s pH is too high, it hinders the chlorine’s ability to efficiently clean the pool. A water pH level that is too low causes the chlorine to dissipate more quickly.
What is free chlorine in the pool?
Free chlorine refers to the amount of chlorine that has yet to combine with chlorinated water to effectively sanitize contaminants, which means that this chlorine is free to get rid of harmful microorganisms in the water of your swimming pool.
Why does my pool keep getting mustard algae?
If the pH or alkalinity of your pool is off, that may be the culprit. Debris, phosphates, and pollen also can cause yellow algae, and you’re more likely to get algae in warmer climates or in areas with environmental and atmospheric changes.
How long does it take to get rid of mustard algae?
For 3-5 days after shocking, maintain a high chlorine level, and continue to brush your pool. Shock it again. After a few days, shock your pool again at normal strength, just to make sure you have gotten all of the mustard algae.
What is the brown dust on bottom of pool?
An algae-free pool is a healthy one. The appearance of brown algae on the bottom of the pool is a sign of the beginning of an infestation of mustard algae. This is one of the most difficult types of algae to get rid of, and gets its name from its yellowish-brown color.
SLAMing your pool is the best way to eliminate algae, sanitize your pool and get your water crystal clear. If you have algae, or the CC level is above 0.5, or the free chlorine (FC) level is zero, you should SLAM the pool. You cannot do this overnight…it often takes several days to see it completed…no shortcuts.
How much free chlorine do I need to slam my pool?
As the chart shows, a pool with a lower level of CYA at 30 ppm needs to be SLAMed with a free chlorine level of 12 ppm consistently . (Considering the ideal free chlorine level is normally kept between 2 and 4 ppm, you can imagine how much chlorine is needed to spike it to 12!)
What is the best pH level for a Slam Pool?
The ideal pH level for a clean pool sits between 7.4 and 7.6, but when you SLAM you’ll have to bring down the pH level to 7.2. This is done because over the course of the SLAM, pH testing becomes unreliable due to the massive chlorine levels in the water. Test and adjust your pH level to start.
Is slaming the same as shocking my pool?
While they are similar, SLAMing is not the same as shocking your pool. Pool shocking is done when there’s a high level of combined chlorine in the water, and low levels of free chlorine available. Shocking takes place overnight by dosing the pool with a high level of free chlorine.
