What port does IPMI use?

What port does IPMI use?

623
The default port number for IPMI is 623. IPMI uses UDP not TCP.

How do I connect to a Supermicro server?

  1. When powering up the unit hit the DEL key on the keyboard numberpad to enter the BIOS.
  2. Once in the BIOS navigate to the IMPI option with the arrow keys.
  3. Select the BMC Network Configuration and press Enter.
  4. Select Update IPMI LAN Configuration, press Enter and select YES.
  5. Configure the Address Source for DHCP or Static.

What port does Supermicro IPMI use?

IPMI uses the same UDP port number (623 in decimal) as the ASF (Alert Standard Forum) protocol. If the managed system is protected by a firewall, UDP port 623 must be opened.

How do I access my IPMI server?

Log In to the Remote Console Input the IPMI IP in the browser address bar, and press Enter. Once you are connected to the remote server via IPMI Console Redirection, the following IPMI Login screen will display. Enter your username in the Username box. Enter your password in the Password box and click on Login.

Is IPMI a TCP or UDP?

Port 623 Details

Port(s) Protocol Service
623 tcp dmtf
623 udp ipmi
623 udp
623 tcp trojan

How do I connect to IPMI port?

How to setup IPMI

  1. Plug in an Ethernet cable into a port on your motherboard and the other end to your network switch.
  2. Access the bios by pressing the delete key when presented with the Supermicro splash screen when booting the Storinator.
  3. Go to the IPMI tab, then to BMC Network Configuration.

How do I mount a virtual media in SuperMicro IPMI?

To mount virtual media, connect to the IPMI web interface of the system by entering its IP address into the web browser on a client system. Navigate to Remote Control > Console Redirection, then click on Launch Console.

What is IPMI over LAN used for?

IPMI is a hardware solution for controlling and managing your servers. It has significant differences and benefits compared to system diagnosis software. For example, IPMI gives you the ability to manage servers in remote physical locations regardless of the installed operating system.

How do I reset my SuperMicro server?

Please go to IPMI web interface >> Configuration >> Port, check if IKVM server port is enabled. Next try to reboot BMC by going to IPMI web interface >> Maintenance >> Unit Reset. If it doesn’t work, please download IPMICFG and run the utility with option -fde to reset BMC back to factory default.

author

Back to Top