What rpm do you run a square baler?

What rpm do you run a square baler?

Make sure your baler is running the full 540 rpms (revolutions per minute). Since your baler runs at 82 strokes per minute, you’ll now be baling around four “square” bales per minute.

What is a high density baler?

The ability to produce top quality bales in all crop conditions sets KUHN Large Square Balers apart from all the others. …

What do hay dogs do?

A hay dog, when operating as designed, serves to hold the hay in place when the plunger returns to the front of the baler. It’s a key element in making tight bales. If the hay dogs do not hold the end of the bale in place, the hay will push your twine forward and the tucker finger will miss laying it on the hay needle.

How does a Haybailer work?

The round baler picks the hay from the ground and feeds it into the bale chamber. The hay is then wrapped onto itself by means of six to eight long rubber belts which are around 7 inches wide. As extra hay is picked up and drawn into the baling system, the bale becomes spherical and fills the bale chamber.

Is hay or straw better for dogs?

Straw breaks down quickly under a dog, creating a pile of straw dust. Conversely, grass hay will retain its structure much longer than straw, creating much less dust. The best grass hay suitable for dog bedding comes from warm season grasses such as Big Bluestem and Indian grass.

Can hay give dogs mange?

Although hay and straw often make suitable beddings for livestock, they are poor choices for dogs. Hay and straw often serve as great habitat for fleas, as well as other bugs, such as the mites that cause sarcoptic mange.

Do round balers have Knotters?

While it is still in use, the baler knotter has become less popular, particularly in large industries. For the most part, it has been replaced by round bales. These are much larger than even the most substantial rectangular bales, and they are used primarily on large industrial farms.

How are square bales of hay made?

Back in the 1950s and 60s, most hay was put up in square bales. Farmers cut hay in the field and let it dry for several days in the sun. Then they raked the dried hay into rows and ran baling equipment over the rows. This produced the bales.

Is this MF 124 Baler any good?

MASSEY FERGUSON MF 124 BALER This little square baler may look a little on the dull side but; that doesn’t stop it pumping out bale after bale with ease. It has it’s imperfections too, but overall its a solid little unit capable of putting in the hard yards.

What is the length of a Massey Ferguson 124 Bale?

The Massey Ferguson 124 was capable of producing fi rm, well formed bales. Length of the 356 x 457 mm (14 x 18 in) bales could be adjusted from 558 to 1270 mm (22 to 50 in). Bale length variation, at the 1000 mm (39.4 in) setting was about 100 mm (3.9 in). For a certain length setting, longer bales were usually produced at higher feedrates.

Is the MF 124 Baler an Equal Opportunity Lender?

Equal opportunity lender. MASSEY FERGUSON MF 124 BALER This little square baler may look a little on the dull side but; that doesn’t stop it pumping out bale after bale with ease. It has it’s imperfections too, but overall its a solid little unit capable of putting in the hard yards.

Where are Massey Ferguson balers made?

Baler production was transferred to Massey Ferguson’s Marquette baler and combine plant in France, leaving the Kilmarnock factory to concentrate on combine production. Development can never stand still, and the MF 703/10 balers provided a useful platform on which to build the style and function of the MF conventional balers for years to come.