Where is the oil hole on a Hunter ceiling fan?
Where is the oil hole on a Hunter ceiling fan?
Locate the oil-fill hole at the top of the motor. Place the tip of the oil tube in the hole, and let gravity draw the oil into the fan for about one minute. Do not squeeze the tube.
How do I oil my original Hunter Fan?
Oiling the Anniversary Model (51123)
- Remove the oil cap and cut the tip off the end of the tube.
- Lift the cap of the oil hole to the oil reservoir at the top of the fan.
- Place the tube into the oil hole and gently squeeze the tube to empty the oil into the fan’s reservoir.
Do Hunter ceiling fans need oil?
Hunter fans do not require oil, with one exception. The Hunter Original® has a very unique motor that uses an oil-bath lubrication system. This system keeps the main bearings lubricated at all times, for quiet operation and long-life.
How do you oil a Hunter ceiling fan without taking it down?
Just turn off electricity, remove the cover (usually screws on the sides and/or bottom), unscrew the blade-holder assembly (this will require a screwdriver), and then pour or smear oil on the exposed motor shaft. Then, reassemble the fan. Simple!
Why are hunter original fans so expensive?
It costs more to make a Hunter fan because they are not built on high speed assembly lines where mistakes and flaws can go unnoticed. Instead, Hunters are created on quality-paced lines with the latest manufacturing and precision testing equipment.
What kind of oil do Hunter ceiling fans use?
tube of high-grade SAE 10 non-detergent oil is designed to maintain the unique oil bath lubrication system of the Hunter Original® ceiling fans for a lifetime of quiet operation.
Should ceiling fans be lubricated?
Like any machine with moving parts, ceiling fans need proper lubrication to run smoothly. Some newer fan models are self-lubricating and don’t require much maintenance from you, says fan/#forward” rel=”nofollow noopener”>Flush Mount Ceiling Fans, while others need fresh oil added each year.
What kind of oil do you put in a Hunter ceiling fan?
SAE 10 non-detergent oil
tube of high-grade SAE 10 non-detergent oil is designed to maintain the unique oil bath lubrication system of the Hunter Original® ceiling fans for a lifetime of quiet operation.
Can you spray WD40 on ceiling fan?
Warning. Never spray WD40 on the ceiling fan motor; as it is not an oil-based lubricant, it can damage the motor instead of loosening any stuck or rusting parts. Never spray WD40 on the ceiling fan motor; as it is not an oil-based lubricant, it can damage the motor instead of loosening any stuck or rusting parts.
Where are Hunter original fans made?
Memphis, Tennessee
At the main Hunter plant in Memphis, Tennessee, demanding engineers and inspectors will not accept fans that whir, wobble or break down. Each fan is carefully tested for maximum performance, quiet operation, and overall quality of finishes. No other manufacturer puts its products through such rigorous tests.
Can you use WD 40 on a ceiling fan?
How do I add oil to a Hunter Original Fan?
Add SAE 10 nondetergent ceiling fan oil to the Hunter Original. You can obtain ceiling fan oil at home-improvement stores and fan and lighting stores. Locate the oil-fill hole at the top of the motor. Place the tip of the oil tube in the hole, and let gravity draw the oil into the fan for about one minute.
Do I need to oil my Hunter ceiling fan?
Some ceiling fans are designed to be oiled, others are designed to “never” need oiling. However all moving parts require lubrication, and no oil or grease will will last forever. So even fans claiming to have permanently sealed and/or lubricated bearings may need oil at some point.
How do I oil a ceiling fan?
Adding Oil Buy non-detergent electric motor oil. This is the kind of oil that works well for fans. Clean the oil hole and fan. Use a rag to clean off your fan with an all-purpose cleaner. Fill the oil hole with 1-2 ounces of oil. Slowly pour oil into the fan’s oil hole. Test your fan.
What is ceiling fan oil?
Ceiling fans need to have an oil-based lubricant in order to work. Using WD-40 on it will damage the motor instead of loosening up stuck parts. If at all possible, stick to oil-based lubricants or whatever your user manual suggests you use.
