Why is my Maytag washer not washing?

Why is my Maytag washer not washing?

When your washer isn’t working right, the solution may be as simple as switching up detergents, tightening a hose or leveling the appliance. If you have a front load washer, a dirty drain pump filter can be a common cause of the issues listed below, like problems draining, spinning and odor.

How do you reset the lid lock on a Maytag washer?

Once paused, the lid automatically unlocks to allow changes to the current load.

1. Touch “Cycle Signal” near the front-loading washer’s LCD control panel to deactivate the washer’s lock controls.
2. Push “Start/Pause” to temporarily halt the washer’s current cycle, and wait for the indicator light below “Pause” to light up.

How do you reset the code on a Maytag washer?

How do I clear the error code on my Maytag washer? To clear the error code on your washing machine, you have to press the pause/ cancel button twice and the power button once. If still, code is displayed, unplug the machine for a minute.

Why won’t my Maytag washer agitate or spin?

Common solutions for: Maytag Washer won’t spin or agitate Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. The motor coupling connects the motor to the washer transmission. If the lid switch assembly fails, the washer will not spin.

Why is my HE washer not cleaning my clothes?

If your top-load washer isn’t cleaning your clothes properly, it may be because you’ve selected the wrong load size. Your clothes mush move through the water in your washing machine with the right turnover action in order for the soils and detergent to be rinsed from the clothes.

Why is my washing machine not switching on?

One of the most common reasons for a washing machine refusing to start is the door, the interlock to be precise. If it is a problem caused by your machine overheating then simply give it some time to cool down, unplug the machine leave it for a few hours and then try plugging it in again.

What are the problems with Maytag washers?

Common problems with Maytag Bravos washers include failure to start, water filling slowly, water leakage, failure of the door or lid to lock and overflowing.

What are some common problems with the Maytag Bravos washer?

Mold Issues: This problem is caused by the moisture inside the tub.

Loud Spinning Cycle: This can be caused from a number of things,but the most common issue is a loose part inside the motor.

Leakage: This can be a huge problem if it is not taken care of quickly.

How to troubleshoot a Maytag Bravos washer?

Open the lid if the washer severally vibrates during spinning and redistribute the load.

Adjust the feet on the appliance if it continues to rock or vibrate during spinning. Use a level to verify the machine sits level and flat.

Check for a coin,bobby pin or some other metallic object not removed from a clothing pocket if you hear clicking noises coming from the machine.

Confirm lid is closed if washer won’t spin. Most washers won’t spin with the lid open and some won’t work at all with the lid open.

Check that the water supply valves are fully open if the washer doesn’t fill with water.