Flush the system by setting the Custom Clean knob to the “Rinse” Setting
Turn on the machine
While holding down the trigger make one forward and reverse wet pass
Release the trigger and make another forward and reverse pass
Reset the dial to ‘tools’,then clean the hose by suctioning clean water from a container
Before replacing the hose,lift and stretch it to make sure no liquid remains
Any attachments that need cleaning can be removed and rinsed,then dried and replaced in the tool caddy
Your system is now clean and flushed!
Rinse your water tank with hot water,taking care to clean all around the pouch
Clean the top half of the tank through the nozzle area
Pop out the red filter and rinse that as well
Replace it before putting the tank back together
Before putting the tank back on,remove the floor nozzle and rinse it out at the faucet
Pull off and throw away any loose hair or debris that have attached to the brush rolls
The inside of the end caps can be wiped clean or removed and rinsed clean
Replace the nozzle on the machine by hooking the tabs into the holes on the bottom then securing it with the screw
Your machine is now ready to store until your next use
How to operate Bissell ProHeat 2x Revolution?
You can start with filling the water tank right at the back of the cleaner. You can do this by lifting the clean water tank first.
Once the water tank cap is closed,slide it back to the machine.
Once the water tank has been secured,it is time to clean your rug.
Now,this is the time to choose your cleaning mode.
How to use a Bissell Little Green Machine?
Bissell Little Green Machine Assembly. While the main unit of any Little Green Machine comes preassembled,you may have to attach the hose clip and cord-wrap pieces onto the base
