What are 1176 compressors good for?
What are 1176 compressors good for?
It can add a very useful, gritty compression effect. This setting is especially useful on bass, where compression and distortion might be needed at the same time, and the 1176 can provide both in a unique way. This trick also sounds great on screaming lead vocals.
Who made original 1176?
Bill Putnam
The 1176 Peak Limiter is a dynamic range compressor designed by Bill Putnam and introduced by UREI in 1967. Derived from the 175 and 176 tube compressors, it marked the transition from vacuum tubes to solid-state technology.
What is a 1176?
The 1176 Peak Limiter is a dynamic range compressor designed by Bill Putnam and introduced by UREI in 1967. Derived from the 175 and 176 tube compressors, it marked the transition from vacuum tubes to solid-state technology.
What type of compressor is la2a?
The LA-2A is a hand-wired, tube-based compressor. It uses an electroluminescent panel together with a cadmium-sulfide light-dependent resistor (which in the LA-2A’s own terminology is called the T4 cell) to provide gain reduction.
What does the 1176 mean on a compressor?
The 1176 is a little bit tricky to fully grasp at first because of the backwards knob settings. Whereas on most compressors 1 would be the fastest and 7 would be the slowest (in relation to attack and release times), it’s the opposite… 1 on both the attack and release knobs indicates the slowest setting while 7 is the fastest…
How do I use the threshold knobs on an 1176 compressor?
The first knob we’re going to look at is the Input knob. The 1176 does not have a Threshold knob. It’s a fixed Threshold Compressor. When you have a Threshold knob on a different kind of Compressor, you bring the Threshold down to meet the signal. On the 1176, you use the Input knob to bring the signal up to meet the Threshold.
What is the error code for the Universal Audio 1176 compressor?
(Error Code: 102630) The venerable and very useful 1176 compressor from Universal Audio has few controls but they are powerful and sometimes confusing. In this video Fab explains all relevant settings and shows example on how to make the best of them in a musical way.
What are the different compression ratios on the 1176ae?
The four Ratio buttons on the left of the meter are used to set the degree of compression — lower ratios (4:1, 8:1) for compression, higher ratios (12:1, 20:1) for limiting. And, exclusive to the 1176AE, there’s an even lower, 2:1 ratio — for a smooth, soft-knee compression that’s perfect for vocals.
