How do I reset my Philips steam generator?
How do I reset my Philips steam generator?
Easy De-Calc Function
- Unplug and let it cool completely — at least 2 hours.
- Place the steam generator at the edge of a table or sink. Hold a cup (at least 350 ml) under the EASY DE-CALC knob.
- Remove the knob.
- Put the knob back in place and turn clockwise to tighten.
- You are now ready to keep ironing!
Why does my Philips iron keep turning off?
If your steam iron is left unused horizontally for more than 30 seconds, or vertically (heel rest) for more than 8 minutes, it switches off automatically for safety reasons. When this happens, the heating-up light flashes.
Why is my Philips steam generator not steaming?
If the water level on your Philips Steam Generator Iron is below the minimum level or there is no water in the tank, your iron is not able to generate steam. Ensure that there is water in the tank or that the water is above the MIN level icon. After this, your iron should work again.
How do you unblock a steam generator iron?
Pour one part vinegar and two parts water into the reservoir. Turn the iron on, and when it’s hot, hold it soleplate-side down. (Do not place anything valuable beneath it, because the sediment is going to drip out.) Press the steam button until steam flows freely out the bottom.
Why has my steam iron stopped working?
CAUSE: One of the most common reasons for iron press not working could be a blown fuse. In some cases when the fuse of the iron press burns or blows, then it may stop working altogether. SOLUTION: If this is the case, then the only solution for this is to get the fuse checked and then replaced by a professional.
How do you fix an iron that won’t heat up?
- Make sure that your appliance is plugged into a working outlet.
- Check the power cable and make sure that it’s not damaged.
- Make sure the temperature adjustment knob is set above the MIN position.
- Once you plug in your iron and adjust the temperature, the thermostat indicator should light up.
Why doesn’t my steam iron stopped steaming?
There may not be enough water left in the tank. Your iron needs to get hot enough to turn water into steam. Give your iron a few minutes to heat up before using it. Check your user manual and make sure that you’re using your iron at a temperature setting that is hot enough for the steam function.
Why is my steam generator not steaming?
The heating element is defective The heating element heats the water inside your steam generator. If it’s defective, it won’t be able to heat the water and your appliance will not produce any steam. Try descaling your appliance and testing it again afterwards.
How do you Decalc a Philips steam iron?
All Philips steam irons
- Fill the water tank and turn on.
- When the light goes out, unplug and hold the iron over the sink so the soleplate is horizontal.
- Activate CALC CLEAN using the button or selector.
- Shake the iron gently back and forth until empty.
- Heat the iron and glide over a cloth to clean the soleplate.
Why Philips iron is not working?
If there is no water in the water tank of your Philips Steam Iron, your iron is not able to generate steam. Please refill the water tank with water. After this, your iron should work again.
What type of water should I use in my Philips steam generator?
We recommend using tap or demineralized water for all Philips steam generators and irons. Demineralized water is the best option to prevent limescale build up in your iron. Please never use ironing or perfumed water in your Philips steam generator iron.
How do you descale a whirlpool steam generator?
When your steam generator beeps and the CALC CLEAN light flashes, it’s time to descale. Fill the water tank halfway and ensure that your steam generator is turned on. If your iron has a temperature dial with CALC CLEAN setting, set the dial to CALC CLEAN. Place your iron on the SMART CALC CLEAN container.
How do I Clean my Iron with a steam generator?
Fill the water tank halfway and ensure that your steam generator is turned on. If your iron has a temperature dial with CALC CLEAN setting, set the dial to CALC CLEAN. Place your iron on the SMART CALC CLEAN container. The container was provided with your steam generator in the box.
How do I clean the soleplate of my steam generator?
When your steam generator stops beeping and the CALC CLEAN light stops flashing, the cleaning process is complete. Use a clean towel to dry the soleplate. You are now ready to keep ironing! Prolong your iron’s lifetime with easy descaling steps. Unplug and let your steam generator cool completely — at least 2 hours.
