How do you reset the service engine soon light on a Nissan?
How do you reset the service engine soon light on a Nissan?
Depress and release the gas pedal five times in five seconds, then let the pedal up. Count seven seconds and then depress the gas pedal and hold it down for 10 seconds. As soon as the service engine soon light starts flashing trouble codes, let the pedal up.
How do you turn off the check engine light on a Nissan Murano?
How to Turn Off a Check Engine Light on a Nissan
- Open the driver’s side door and get into the drivers seat.
- Insert the key into the ignition and turn it a quarter turn so the ignition turns on, but the engine doesn’t start.
- Step on the gas pedal and quickly release it.
- Wait 10 seconds.
How do you reset the service engine soon light on a 2003 Nissan Xterra?
You can clear the code (and the annoying SES light) by holding down the accelerator pedal for more than 10 seconds while the SES light is blinking. When you release the pedal, the ECM erases the trouble code(s).
Is it safe to drive with service engine soon light on?
That having been said, you can probably drive safely with the service engine soon light on, as long as it is on solid and not flashing. If the service engine light is flashing, you should pull over immediately and call for roadside service and have the vehicle towed to the mechanic.
How do you reset the maintenance light on a 2018 Nissan Murano?
Press the OK button on the steering wheel to go into the Oil and Filter menu. Use the Up and Down arrows to toggle the selection to Reset. Your light will now be reset. Your Murano requires an oil change and new oil filter every 5,000 miles or SRX months.
How to reset service engine soon warning light on Nissan Murano?
How to Reset a Service Engine Soon Warning Light on a Nissan Murano. 1 Step 1. Open the driver’s side door of the Murano and look under the dashboard on the left-hand side of the steering wheel (although certain year 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.
How do you erase the inside of a Nissan Murano?
Turn the ignition key to the Murano two clicks forward to the accessory power position. This position empowers all the options on the Murano without the engine running. Follow the onscreen menu of the scanner or simply press the “Erase” button (if equipped).
How do I use the OBD II scanner in a Nissan Murano?
The battery in the Murano will provide power to most all OBD II scanners, but refer to the manual for a “Power” or “On” button. Turn the ignition key to the Murano two clicks forward to the accessory power position. This position empowers all the options on the Murano without the engine running.
