What size bearing is a l44649?
What size bearing is a l44649?
L44649/L44610 Timken Tapered Roller Bearing 1.0625×1. 9800×0. 5600 inch
| Dimensions – d (inside diameter) | 26.99mm |
|---|---|
| Dimensions – D (outside diameter) | 50.29mm |
| Dimensions – B (width) | 14.22mm |
What is a number 84 spindle?
A #84 spindle, like # TRU24FR or # TRU47FR is bigger and is used for 3,500 lb axles. Common sizes for these are 2-3/8 inch round axle, 3 inch round axle, and 2 inch square axle.
How much endplay should a preset bearing assembly have?
ACCEPTED PRACTICE. For decades, the heavy duty truck industry has accepted a recommended wheel end bearing setting of 0.001-inch to 0.005-inch of endplay. This does not mean that loose bearings equals good wheel end performance.
What size spindle does a L44649 bearing fit?
1-1/16″
Trailer hub cone bearing for 1-1/16″ spindle. High-quality, tapered roller bearing designed for high-speed use. Inside diameter: 1.063″, Outside diameter: 1.98″.
What size bearing is L68149?
The inner diameter of bearing # L68149 is 1.378 inches. Both fit on a #84 spindle.
What is a #42 spindle?
This is referred to as a #42 Trailer Spindle, which features a 1 1/4″ Bearing Surface and a 1 3/4″ Bearing Surface. You can see the product pictures for exact dimensions of this Spindle. This Spindle includes the Spindle Washer, Castle Nut, and cotter pin.
What is a spindle number?
The number is the diameter of the spindle therefore the inner diameter (ID) of the bearings used on the hub.
How do I know spindle size?
In order to measure the spindle length, you need to remove the cranks and then measure the spindle length. There is no guarantee that the spindle is symmetric or the width of the cranks on both sides is the same. In any case, you’ll need to pull off the cranks to replace them.
Does a PreSet hub has endplay?
“Now with the PreSet and the unitized hub, you don’t have to measure endplay when you do the installation. Because of the components and the close tolerance of the product, the endplay is controlled by the stack up of tolerances in the system.
What is wheel bearing endplay?
The wheel end is the heart of the axle and its margin for error in setting end play — how loosely or tightly the bearings sit inside the hub — is thinner than a sheet of paper. The Technology & Maintenance Council (TMC) Recommended Practice 618B suggests .
