What is ARP on Jeppesen charts?
What is ARP on Jeppesen charts?
17 — The geographical location of the Airport Reference Point (ARP) is depicted when known.
What does an asterisk (*) before an altitude along a low altitude airway indicate?
The asterisk identifies this altitude as the MOCA, or the Minimum Obstacle Clearance Altitude.
What does minimum enroute altitude guarantee?
Put simply, the MEA is the lowest altitude to be flown in an airspace structure which assures: reception of navigation aids necessary to navigate accurately along the required route, two-way communication with air traffic control, safe clearance from obstacles within the sector, and.
What does a brown airport symbol indicate on the low enroute chart?
On IFR Enroute Low Altitude Charts, airport tabulation is provided which identifies airport names, IDs and the panels they are located on. Brown – Airports without a published Instrument Approach Procedure or RADAR MINIMA Airports are plotted at their true geographic position.
Where is runway slope on Jeppesen charts?
To determine the runway slope, the run- way elevations at both ends can be used with the runway length that is shown adjacent to the runway symbol. Also, at each of the runway ends, the runway number is shown with the magnetic bearing down the centerline of the runway.
What are IFR T routes?
T-routes are low altitude Air Traffic Service (ATS) routes, based on RNAV, for use by aircraft having instrument flight rules (IFR)-approved Global Positioning System (GPS)/Global Navigation Satellite System (GNSS) equipment.
How do you find the minimum holding altitude?
The minimum holding level provides a clearance of at least 1000 ft (300 m) above obstacles in the holding area, a value (as given in the table) above obstacles in the buffer area. The minimum holding altitude to be published shall be rounded up to the nearest 100 ft, or 50 m, as appropriate.
