What is the logic function for a 8 1 mux?
What is the logic function for a 8 1 mux?
The given function is in terms of minterms and is to be implemented using a 8:1 MUX. An 8:1 MUX has three select lines, whereas the given function is a 4 variable function. Hence a logic is needed to give combination of A as inputs while only B, C and D as select line inputs.
How many select lines will be there if the inputs of a MUX are 8?
3
An 8 × 1 multiplexer selects one of the 8 inputs and presents it to the output, i.e. So the number of select lines will be 3.
How many and Gates does a 16X1 MUX require?
4 transmission gates
5.2. A 16X1 MUX offers a load of 4 transmission gates to its inputs. A Tri-State MUX is one which along with driving the data (either 0 or 1) to the output can also result high impedance state.
How many select lines will be required for an 8 line to 1 line multiplexer Mcq?
How many select lines would be required for an 8- line-to-1-line multiplexer? Explanation: 2n input lines, n control lines and 1 output line available for mux. here, 8 input lines mean 23 inputs. so, 3 control lines are possible.
What is an 8×1 MUX?
Now this 8×1 MUX is a high-level multiplexer. For simplicity, the 8×1 mux can also be implemented using 2×1 or 4×1 multiplexers. You can observe that the input signals are D0, D1, D2, D3, D4, D5, D6, D7, S0, S1, S2 and the output signal is out. First of all, we need to mention the timescale directive for the compiler.
What is the use of MUX device?
Mux is a device That has 2^n Input Lines. But Only One has Output Line. Where n= number of input selector line. Mux is A device Which is used to Convert Multiple Input line into one Output Line. At a time only one Input Line will Connect to the output line.
How many input and output lines does a 2^N multiplexer have?
A 2^n:1 multiplexer has 2^n input lines, n select lines, and a single output line. You can find a detailed explanation and schematic representation for multiplexers over here. There are four layers of abstraction in an HDL:
