What is the actual thickness of 19 32 OSB?
What is the actual thickness of 19 32 OSB?
0.578 in.
This item: Oriented Strand Board (Common: 19/32 in. x 4 ft. x 8 ft.; Actual: 0.578 in.
Can you use 19/32 OSB subfloor?
Oriented strand board, or OSB, is a wood structural panel that can also be used for flooring. OSB can be used for subfloors, although it is not as common as CDX. For 19/32-inch-thick panels, the joists should be 20 inches on center.
How thick is OSB subfloor?
23/32 inch
Subfloor sheets for both OSB and plywood come in 4 x 8 or 4 x 12 sheets. Thicknesses for products used for subfloors are generally 23/32 inch (just under 3/4 inch), but thicker sheets are available where building codes call for them.
What is 19 32 OSB used for?
Shop OSB 19/32 Rated Sheathing OSB is a material with favorable mechanical properties that make it particularly suitable for load-bearing applications in construction. It is now more popular than plywood in the structural panel market. The most common uses are as sheathing in walls, flooring, and roof decking.
What does the blue edge on OSB mean?
Blue Ribbon engineered wood panels have racking strength, impact resistance and uniformity for the consistency you need to keep your jobs running smoothly. They’re manufactured to not have voids, knots or splits and have an exclusive blue edge coating to help reduce moisture absorption. The Sub-floor Advantage.
What thickness is OSB board?
They are fairly straightforward but each one is fairly specific. The thickness of OSB that you need varies on where it is used in a building. Typically 3/4″(18mm) for floors and 3/8″ (9mm) for walls and 1/2″ (11mm) roof.
Is OSB good for subfloor?
Some builders prefer OSB over plywood for flooring because the surface, when new, is always clean, flat, and knot-free. Since OSB is so dense, it’s a good soundproofing product. OSB is a more consistent product than plywood or other types of material for subfloor: every sheet is the same.
What size plywood is 23 32?
3/4-inch
Thicknesses
| NOMINAL VS. ACTUAL SIZES | |
|---|---|
| 1/4-inch | 11/32 |
| 1/2-inch | 15/32 |
| 5/8-inch | 19/32 |
| 3/4-inch | 23/32 |
Can I use OSB for subfloor?
OSB subfloor serves as a base under the finish floor (hardwood, engineered wood, vinyl tile, etc.) Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting.
Which side of the OSB goes up?
OSB roof panels should always be installed with the grade stamp facing into the attic and the screened surface (with the nail guide lines) facing up.
Can I walk on 7/16 OSB?
If you will be using OSB that is structural 1 sheathing rated, the following APA panel trademark ratings should be used: 7/16 OSB, 24/16 APA span rating, 40 psf allowable live load. 15/32 OSB, 32/16 APA span rating, 70 psf allowable live load.
How thick should OSB subfloor be?
Oriented Strand Board. OSB can be used for subfloors, although it is not as common as CDX. For 19/32-inch-thick panels, the joists should be 20 inches on center. For 23/32-inch-thick panels, the joists should be at least 24 inches on center.
What is the best material for a subfloor?
Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.
What size plywood do I use for a subfloor?
Plywood decking used as a sub-floor typically has a thickness of 3/4 inch (19.05 mm). It is also a common practice to use tongue and groove plywood, a type that joins at its seams, for flooring applications. It reduces movement between the two pieces, providing a stable surface to which finish flooring can be attached.
What are the thicknesses of subflooring?
Typically made of plywood or OSB and ranging in thickness from 19/32″ to 1 1/8″ thick, subfloor is truly structural, second only to joists in this respect.
