How do you change the key on a Sentry safe?

How do you change the key on a Sentry safe?

Find it here.

1. Check bottom edge of electronic lock and if equipped with shipping screw, remove and dispose of.
2. Turn electronic lock clockwise (right) and remove.
3. Insert 4-batteries as indicated (Do not use rechargeable, or Non-Alkaline.
4. Replace the electronic lock and turn counterclockwise (left) to reattach.

Are Sentry safe keys universal?

Not all use the same key, nor are they guaranteed to use different keys. If you are lucky, at a retail store, you can sometimes find more than one keyed alike. The key has an alphanumeric code. All Sentry safes are keyed different.

How do I open a safe if I lost the key?

Contact the manufacturer of the safe. The manufacturer will mail you a duplicate key by mail to replace the lost key. You will need to give the model and serial number of the safe when you contact the manufacturer. Manufacturers usually print the model and serial number of the safe near its door hinge.

What do you do if your Sentry Safe won’t open?

Turn your back to the safe, and kick the door, hard, a few times. Be sure that you do not kick the keypad or the handle. This will help loosen the bolt work. Next, pull the handle in the opposite direction than you normally do and enter the code.

How do you open a safe if you lost the key?

What do I do if I locked my sentry safe?

How To Break Into A Sentry Safe | Helpful Legal Hacks

1. Contact Sentry Safe for assistance or call them at 800-828-1438. (Best for safes over $100.)
2. Call a local locksmith.
3. Use a high powered magnet to trip the lock.
4. Use a nail file.
5. Use a paper clip.
6. Other destructive means like using a drill.

Can a locksmith make a safe key?

Have a Locksmith Make the Safe Key If there is a number stamped near the keyhole, a locksmith should be able to get into the safe quickly by cutting a key by code. That number tells the locksmith what key blank is needed and how to cut the key. With that, a key to your safe can be easily made.

How do you unlock a Sentry Safe?

To open a Sentry safe, insert the key, turn it clockwise, and enter the factory code to open the electronic lock. Alternatively, turn the combination lock of the Sentry safe to unlock it. Pull the handle downward to open the door.

How do you replace the battery in a Sentry Safe?

Re: how to change the battery of my sentry safe model… You must replace the batteries located in under the keypad. Use a large paperclip to unlock the cover. Push the paperclip into the small hole while at the same time, sliding the battery cover to the right. Gently remove the battery housing and replace batteries.

How to open a Sentry Safe?

2: Open a Sentry Safe With a Paper Clip#Grab your first paper clip and,by using a pair of pliers or your fingers,start by bending the larger leg so that it is at a 90-degree angle.

Then,bend the paper clip’s other leg tip so that the paper clip resembles a wrench.

Taking your second paper clip,bend one leg to a 180-degree angle and the other to a 45-degree angle.

Insert your first paper clip,the one that looks like a wrench,into the lower section of your safe’s lock.

Then,take your second paper clip,the feeler pick one,and place it in the upper section of the lock. This is where the teeth of the locks are located.

Twist clockwise with the lower paper clip while simultaneously wiggling the other paper into the lock’s teeth.

Continue pressing the pins of the lock until you hear a ‘click’ noise. This means you’re in the right place and that you’re opening the lock.

Press the pins three more times and then turn both paper clips clockwise to open the safe.

How do you open a sentry safe without the combination?

The easiest and most cost-effective way to open a Sentry safe without the combination is to contact the company with the model, serial number and a notarized ownership form.