What does F24 mean on Whirlpool washer?
What does F24 mean on Whirlpool washer?
The “F24” fault code indicates a water temperature sensor error. The temperature sensor could be faulty; the wire connection may have vibrated loose or off the sensor or a possible heater or control board failure.
What does F24 error code mean?
Error code F24 generally means that a problem has been detected with the water temperature sensor. The temperature sensor is designed to measure the water’s temperature, making sure the temperature falls within acceptable parameters for the selected wash cycle and fabric selections.
What does F24 mean on Maytag washer?
The “F24” fault code indicates a water temperature sensor error. There is a water temperature sensor (key#24) located at the bottom rear of the tub. There is a chance that one of the two wires may have worked loose or the sensor is not measuring the water temperature correctly.
What does f1 mean on Whirlpool oven?
This error code indicates the electronic control has detected an internal malfunction or it could have sensed a runaway temperature condition. The sensor will need to be checked first before replacing the control. To check the sensor set the oven temperature to 350 and let it cycle at least 3 times.
What does F24 mean on my Vaillant boiler?
F24. F24 is indicative of a pump fault which could have become blocked, failed or overrun. There could also be an issue with the air lock, with air inside the boiler.
How do I fix F1 error on my oven?
On some models it is possible that F1 could also be caused by a keypad problem. In this case it will specify in the tech sheet to power down the oven, disconnect the keypad then power the oven back on, wait for a few minutes to see if the error reappears. If the error reappears it is definitely the control board.
How do I fix F1 error on stove?
You can try resetting the range by disconnecting it from the outlet or switching off the circuit breaker of the home for 10-20 minutes then restore the power. If the reset doesn’t work your range may have one of the above failures.
What does a temperature sensor do in a washing machine?
Replace the washer electronic temperature control board The electronic temperature control board has a thermistor (a temperature sensor) that detects the temperature of the water entering the tub.
https://www.youtube.com/watch?v=9-_FaUY4cFA
