Does motherboard warranty cover bent pins?

Does motherboard warranty cover bent pins?

Every motherboard manufacturer out there won’t replace a motherboard with broken pins or ANY physical damage for that matter.

Can you fix bent processor pins?

If the pin seems reasonably straight, you can attempt to remount the CPU. If the pin still needs straightening, try the credit card or mechanical pencil now that you can get underneath it. You can also continue to manipulate the pins with needle to try to get them straighter.

Can a motherboard work with bent pins?

Yes you can do that. However, recent motherboard pins is really small, I can’t see the direction the bent pins goes. So I don’t know which direction I need to push back the pin into. In the case like this, I requested RMA to the supplier and they replaced it with a new one.

Does AMD warranty cover bent pins?

No guarantees. If the pin is a signal pin and you have electrical issues, the system will be unstable. Pins can be straightened carefully if necessary, but use the absolute minimum force to do so.

What happens if you get thermal paste on CPU pins?

Thermal paste on the pads on any current Intel CPU, no problem just wipe it off. Thermal paste on the pins in the socket in the motherboard, you can’t do anything to it. With any luck, install the CPU and see if it boots and behaves normally. The socket pins are extremely fragile.

Does CPU warranty cover bent pins?

Bent pins aren’t covered under the warranty. So if you do RMA the CPU they might charge an additional fee.

What happens if motherboard pins are bent?

Bent or broken pins on your laptop’s CPU or motherboard can cause a wide range of issues, including dead RAM slots, refusal to boot, and connectivity issues.

What happens if CPU socket pins are bent?

The pins are designed to be stiff, which means the metal they are made from will quickly develop metal fatigue when bent, and that will cause the pin to break. The pin has already been bent once, so straighten it slowly and carefully.

Does AMD replace bent pins?

If you’ve been around AMD chips for a while then you’ve probably had to bend a pin back into place once or twice. According to a tweet from Executable Fix, a well-known leaker, AMD will finally move away from PGA to LGA with the shift to AM5, the new socket set to replace AM4.

author

Back to Top