Who makes NP1?
Who makes NP1?
BASF MasterSeal NP 1 Aluminum Gray Elastomeric Polyurethane Sealant 10.1 oz.
How long does NP1 sealant last?
Longevity: Up to 15 years. Meets federal specifications TT-S-00230C, Type II, Class A; ASTM-C-920, Type S, Grade NS, Class 25 – use NT, M, A, G, and I; Corps of Engineers CRD-D-541, Type II, Class A; and ISO 11600-F-25LM. USDA approved for use in meat and poultry areas.
Is MasterSeal NP1 self leveling?
MasterSeal SL 1 (formerly known as Sonolastic SL 1) is a one-component, non-priming, elastomeric, self-leveling polyurethane sealant designed for expansion joints in concrete floors and decks.
How soon can you paint NP1?
The Curing Process dry), the cure time for this sealant can vary. Ideally, if the humidity level is about 50% and the temperature is 75 °F (24 °C), a total cure will take approximately a full week. For immersion with metal structures submerged in water, the curing time will take around 21 days.
How do you clean NP1?
How to Remove NP-1 Caulk
- Run a putty knife along the right and left seams of the bead of caulk to loosen the caulk from the surface.
- Slide the edge of the putty knife under the bead of loosened caulking material, and lift it up from the surface, sliding and lifting as far along as you can until the seam of caulk breaks.
How long does it take for MasterSeal sl1 to dry?
CURE: Skins over: within 24 hours. Foot traffic: 3 days. Full cure: 1 week.
What is NP2 caulk?
Masterseal NP2 Multi-Component Polyurethane Sealant Caulk Base, 1.5 Gallon. MasterSeal NP 2 is a multi-component, highly flexible, non-priming, high-performance polyurethane sealant. It has been successfully tested for joint movement of 50%. It can be tinted to multiple colors.
What is NP1 sealant made of?
BASF MasterSeal NP 1 polyurethane sealant, formerly Sonolastic NP 1, is a one-component, high performance, nonpriming, gun-grade, elastomeric polyurethane sealant. NP1 requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.
Does BASF Masterseal NP1 need priming?
Additional information BASF MasterSeal NP1 Caulk polyurethane sealant, formerly Sonneborn NP 1, is a one-component, high performance, no-priming, gun-grade, elastomeric polyurethane sealant. It comes in eleven standard colors, requires no mixing and typically requires no priming to bond too many materials, including concrete and masonry wood.
What is mastermasterseal np 1?
MasterSeal NP 1 (formerly known as Sonolastic NP 1) is a one-component, high-performance, non-priming, gun-grade, elastomeric polyurethane sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.
Can you paint over Masterseal NP1?
As with most polyurethane sealants, NP1 can be painted. Its outstanding holding power is a perfect fit for long-lasting roof tile installation. MasterSeal NP-1 is UL listed; passes 4–hour, 4–inch, fire and hose stream test when used with Ultra Block or mineral wool.
