Common questions

Does 3CX work with Cisco phones?

author 0

Does 3CX work with Cisco phones?

Supported Models: Cisco 7940, 7941, 7960, 7961 Legacy phone support has been implemented to allow easy migration from an existing phone system to 3CX without the need to directly replace all existing IP phones.

How do I add my phone to 3CX?

  1. Go to the “Phones” in the 3CX Management Console.
  2. Click on “Add Phone”, select the extension to assign this phone to, and click “OK”.
  3. Select the appropriate phone model from the dropdown menu.
  4. Enter the phone’s MAC address without dashes – can be found on the underside label of the phone – and click “OK”.

How do I manually configure my Cisco IP Phone 7940?

How do I configure my Cisco 7940/7960 for SIP service?

  1. Press the Settings key. The Settings menu is displayed.
  2. Highlight Status.
  3. Press the Select soft key. The Setting Status menu is displayed.
  4. Highlight Firmware Versions.
  5. Press the Select soft key. The Firmware Versions panel is displayed.

What phones can I use with 3CX?

Preferred IP Phones

  • Fanvil H Series: H2S, H2U, H3, H5.
  • Fanvil X1 Series: X1S(G/P)
  • Fanvil X2 Series: X2(C/P)
  • Fanvil X3 Series: X3(S/G/SG (Lite/Pro)/SP (Lite/Pro)/SP V2/U, U Pro)
  • Fanvil X4 Series: X4(G/U)
  • Fanvil X5 Series: X5(S/U)
  • Fanvil X6 Series: X6-1.2/X6U.
  • Fanvil X7 Series: X7(A/C)

How do I add Yealink phone to 3CX?

Configuring the provisioning server via the Yealink web interface:

  1. Obtain the phone’s MAC address.
  2. In the 3CX Management Console navigate to ⇒ “FXS/DECT”.
  3. Press “+ Add FXS/DECT”.
  4. Select the Brand of the phone (Yealink).
  5. From the dropdown list select the model.
  6. Enter the device’s MAC address and press “OK”.

How do I unlock my Cisco IP Phone 7940?

To get to the unlock config screen, press the “Settings” button, scroll down to “Unlock Config”, and press the “Select” softkey. You will now be asked to enter the password. The default password is “cisco”. As you need to enter this password via the numeric pad, it should be entered as 222444777722266.

How configure SIP Cisco IP phone?

Cisco IP Phone 7940 / 7960 VoIP settings & configuration

  1. Unlock the configuration protection by pressing “**#”
  2. Press “settings” button. Configure IP connectivity in “Network Configuration Menu” (e.g., DHCP support)
  3. – Select “SIP Configuration” – Select “Line 1”
  4. Make Calls!

What is the Cisco IP phone 7841?

Get simple, highly secure, and highly cost-effective voice communications for small to large businesses with the Cisco IP Phone 7841. It is an ideal endpoint for moderately active voice communications needs of workers, administrative staff, and managers.

What is the Cisco WebEx 10/100/1000 switch?

Integrated IEEE 10/100/1000 switch lowers installation costs and footprint at the desk Cisco Webex Phone OS consolidates administration with common software to both the IP Phone 7800 Series and IP Phone 8800 Series. * Telephony features may vary by vendor platform.

When upgrading a Cisco 79xx IP phone firmware version?

When upgrading a Cisco 79XX IP phone firmware version prior to 8.3.3, you must first upgrade to 8.5.2 before you upgrade to 8.5.4s which is outside of the scope of this document! Download the Cisco 79XX support files. C:\\ProgramData\\3CX\\Instance1\\Data\\Http\\Interface\\provisioning\\XXXXXX.

What is enhanceenhance for the Cisco IP phone 7800 series?

Enhance collaboration with the Cisco IP Phone 7800 Series. (6:40 min) Four line and programmable feature keys enable quick access to telephony features and staff High-resolution, graphical grayscale display makes viewing easier Dedicated fixed keys ** ease communications for increased efficiency

author

Back to Top