What is PE grade HDPE pipes?
What is PE grade HDPE pipes?
HDPE Pipe Grade Granule (Pe 100, Pe 80, Pe 63)
| Plastic Material | HDPE |
|---|---|
| Material | Granule |
| Grade | PE100,PE80,PE63 |
| Usage/Application | Pipes HDPE |
| Brand | KI |
What type of pipe is PE?
Polyethylene
About PE. Polyethylene (PE) is a thermoplastic material produced from the polymerization of ethylene. PE plastic pipe is manufactured by extrusion in sizes ranging from ½” to 63″. PE is available in rolled coils of various lengths or in straight lengths up to 40 feet.
What is PE 100 HDPE?
PE100 is the third generation of pipe grade PE. It has an optimum balance of three key properties: Minimum Required Strength (MRS) – this provides long-term strength and creep resistance.
Is PE pipe safe for drinking water?
The inner pipe for drinking water is made of a plastic called cross-linked polyethylene (PEX). There are no health risks associated with drinking water from PEX pipes. A few types of PEX-pipe may cause prolonged undesirable taste and odour if the water remains in pipes over time.
What does PE 80 mean?
PE80 has been widely used for gas, water and industrial applications for many years and is most commonly named MDPE (Medium Density Polyethylene). However, PE80 could also be HDPE (High Density Polyethylene). PE80 pipes are often rated SDR11 PN12 and have a minimum required strength (MRS) of 8.0MPa (Megapascal).
What does PE mean in pipe?
Polyethylene (PE) is a thermoplastic material produced from the polymerization of ethylene. PE plastic pipe is manufactured by extrusion in sizes ranging from ½” to 63″. PE is available in rolled coils of various lengths or in straight lengths up to 40 feet.
What is the difference between PE 80 and PE 100?
PE100 offers additional long term strength and performance over PE80 while allowing for thinner pipe walls for the same operating pressure. PE100 uses less polymer and provides for a larger bore and increased flow capacity.
How can you tell the difference between PP and PE?
Firstly, there is a difference between the hardness of both materials. Polyethylene (PE) is tough yet light, with good resistance to impacts and abrasions. On the other hand, Polypropylene is harder and can be used for mechanical and structural applications.
What is PE 3408 pipe used for?
Pipe made of high density polyethylene — such as PE3408 and PE3608 — is used mainly in industrial and municipal applications such as water mains or sewer and storm drains. This kind of pipe must bear up under both high pressure from within and the weight of the earth from above when buried deeply in a trench.
What is the difference between HDPE 3408 and HDPE 4710 pipes?
HDPE 4710 pipes with superior ductility, resistance to fracture, and increased performance characteristics allow higher internal pressures than HDPE 3408 without reducing service life. The increase in pressure rating is due to several factors. HDPE 4710 has significantly higher requirements for test data quality, analysis, and substantiation.
What is the difference between pe3408 and pe3608?
Because this classification has been in existence for quite some time, it is sometimes included in specifications even when another pipe is actually being used, such as PE3408/3608 or PE3408/4710. PE3608 has the same resin and HDS designation as PE3408.
What is the crack resistance of pe3408?
PE3408 has a resin designation of 3, a crack resistance factor of 4, and a HDS of 800 psi at 73F. Because this classification has been in existence for quite some time, it is sometimes included in specifications even when another pipe is actually being used, such as PE3408/3608 or PE3408/4710.
