What is the hierarchy of working at height?

What is the hierarchy of working at height?

*Hierarchy of control measure when working at height: Avoid working at height if possible. Use an existing safe place of work. Provide work equipment to prevent falls.

What is the hierarchy of measures?

i) technical measures (e.g. encasing, exhaust), ii) organisational measures (e.g. only qualified employees are allowed to do specified work), iii) personal measures (e.g. wearing PPE), iv) behavioural measures (e.g. peer-observation).

When should you use PPE as a control measure for working at height in the hierarchy of control?

Personal protective equipment should be worn so that if the worker does fall, the distance they fall will be minimal. In work areas involving scaffolding, this is typically done through the use of fall arrest harnesses.

What are the 3 stages of hierarchy?

Hierarchy of Control Measures

• Level 1: Avoid Working at Height.
• Level 2: Ensure All Those Working at Height are Properly Trained and Supervised.
• Level 3: Select Work Equipment that Prevents Falls.
• Level 4: Ensure that Equipment is Suitable, Stable, and Strong.
• Level 5: Regularly Check and Maintain Equipment.

What is the first step in the hierarchy of control height?

Follow the safe work at height hierarchy: –Avoid, Prevent, Mitigate – and give collective measures priority.

What is the importance of hierarchy Measures?

The hierarchy of control merely expands on the minimise or reduce option if a hazard or risk cannot be eliminated, so far as is reasonably practicable. The higher up the hierarchy you go, the safer you should be theoretically.

What does the hierarchy of control do?

The hierarchy of control is a system for controlling risks in the workplace. The hierarchy of control is a step-by-step approach to eliminating or reducing risks and it ranks risk controls from the highest level of protection and reliability through to the lowest and least reliable protection.

What is the purpose of the hierarchy of control?

Traditionally, a hierarchy of controls has been used as a means of determining how to implement feasible and effective control solutions. The idea behind this hierarchy is that the control methods at the top of graphic are potentially more effective and protective than those at the bottom.

What is the first step in the hierarchy of control in working at height?

Level 1: Avoid Working at Height Avoiding work at height also means avoiding work on fragile surfaces, which may be enclosed, but still liable to cause a fall through them rather than off them.

When working at heights preference should be given to?

Preference should be given to systems that stop the falling worker at the shortest distance. In no case can the free fall distance be greater than 1.2 m .

What are the 6 steps in the hierarchy of control?

The hierarchy of control structure

• Substitution. Substitute the risks with lesser risks.
• Isolation. Isolate people from the risks.
• Engineering. Reduce the risks through engineering changes or changes to systems of work.

What are the hierarchy of control measures for work at height?

The Work at Height Regulations 2005 set out the measures that should be taken to prevent falls when working at height is unavoidable. Together, these form the Hierarchy of Control Measures, which are described here in detail. The underlying principle of the Work at Height Regulations is that working at height should be avoided wherever possible.

How do I comply with the work at height regulations 2005?

To comply with the Work at Height Regulations 2005, you will need to fulfil the hierarchy it sets out for you as an employer or controller of work. These are: Where at all possible, you need to avoid any work at height. When work at height is unavoidable, you must take measures to eliminate risks.

What is “work at height”?

The HSE defines “work at height” as follows: “Work at height means work in any place where, if there were no precautions in place, a person could fall a distance liable to cause personal injury.” The Work at Height Regulations 2005 sets out the measures that should be taken to prevent falls when working at height is unavoidable.

Who has a duty of care when working at height?

In addition to these hierarchy of control measures, those with a duty of care – the employer or factory owner – must ensure that work at height is carried out safely and with appropriate supervision. Sufficiently qualified workers must receive proper training and instruction on the work involved.

https://www.youtube.com/watch?v=rPxlgXNDk4g