What is the most efficient subwoofer enclosure?
What is the most efficient subwoofer enclosure?
Generally speaking, the most efficient enclosures are the two narrow-bandwidth bandpass designs with the dual-reflex version having a slight edge. Next in line, the wide-bandwidth dual-reflex and the ported enclosure exhibit very good efficiency as well.
Does Orion still make subs?
Pump up the bass with our lineup of Orion Subwoofers featuring HCCA™, XTR™, XTRPRO™ and Cobalt™ Subwoofers.
Who makes Orion subwoofer?
MD Audio Engineering Inc.
MD Audio Engineering Inc. As the new owner of ORION™, One of the best-know, toughest and well respected high performance brands in the car audio world. Is now making a movement to revolutionize the industry by expanding their product line up.
Why can I smell my subwoofers?
Most new subwoofers produce a smell when their voice coil heats for the first time. When this happens, it means there is an excess glue on the voice coil that burns as the voice coil heats. And this results in a burnt smell from the subwoofers.
How do you make a subwoofer enclosure?
Planning your subwoofer box design
- Determine the minimum depth of your box.
- Determine the minimum height and width of your box.
- Determine the available space in your vehicle.
- Sketch out your box.
- Determine the internal dimensions and volume of your box.
- Calculate the internal box volume in cubic inches.
What happens if subwoofer enclosure is too small?
As the size of the enclosure increases, the mechanical limits of the woofer will be easier to reach. If the box is too small (by a reasonable amount) add power. If the port becomes too small, it may result in port noise, or allow the woofer to simply unload.
Are Orion Speakers good?
The Verdict: Yes I do like these, the guys at Orion have done a really great job with these Component Speakers. They sound amazing at the price point they are at, and would be a great addition for anyone looking for a Quality set of components.
Are Orion Cobalt Subs good?
This sub is rated at 200watts rms & a sensitivity of 87.2 which is pretty good. This subwoofer is good if you don’t plan on having the loudest system, just a nice enjoyable system in your car that won’t really bother anyone outside of the car. It has Great clear sound & hits pretty hard for only 200watts.
What does d4 mean on a subwoofer?
Answer: The difference is the nominal resistance that you are presenting to your amp. The d2 (dual 2 ohm voice coils) can be wired to present 1 or 4 ohm nominal resistance to the amp, and the d4 (dual 4 ohm voice coils) can be wired to present a 2 or 8 ohm nominal resistance to the amp.
What is clipping a sub?
Long term clipping is a result of inadequate RMS or continuous power available for the volume setting. Subwoofers can overheat if not chosen properly, clipping the sound in a similar distorted manner when they fail to completely follow the original waveform even if the amplifier signal is accurate.
What is subwoofer port area?
The port area is in square inches, meaning it takes height times width to calculate total area. A port 4 inches high by 4 inches wide would calculate as 4 x 4= 16 in2. Round that figure to nearest ¼ inch, and you get an offset measurement of 3 ¾ inch wide. The slot port would be 3 ¾ inches wide by 14 ½ inches tall.
