What does code 93 mean on Intex saltwater?
What does code 93 mean on Intex saltwater?
power-saving mode
Code “93” is displayed when the programmed cycle ends and indicates that the system is in stand-by/power-saving mode. If you want the system to be on right now, just turn the power switch off, wait a couple seconds and turn it back on.
How do I know if my Intex saltwater generator is working?
The easiest way to ascertain if the chlorinator is working is to make sure the cell is clean by checking the needle or production lights. Ensure there is enough salt in the pool. On the chlorinator box there should be a light or dial that indicates it is working.
Can you swim while salt water system is running?
However, because chlorine dissipates over time (which is why pool owners must constantly go to the store, constantly purchase, and continually add standard chlorine to their pools), if you happen to run your Saltwater System too long, you can simply begin running it for a shorter period the next day, and your pool will …
What are the pros and cons of a saltwater pool?
The Pros and Cons of Saltwater Pools
- PRO: Saltwater pool is softer on your eyes and skin.
- CON: A saltwater pool is more expensive than a chlorine pool.
- PRO: They usually require less maintenance than chlorine pools.
- CON: Saltwater pools require expert technicians for repairs.
Do I need a sand filter with a saltwater system?
All saltwater pools need a Filter System to maintain crystal clear water. There are 3 types of filter systems you can choose from; Sand, Cartridge and D.E. Sand filters require specially graded sand to trap particles and debris.
Why is my salt pool not generating chlorine?
The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.
How long should I run my Intex saltwater system?
First make sure you run just the filter pump for at least six hours to ensure the salt you’ve added has dissolved properly. Then you can run the salt water system fir the time recommended in the manual. If it’s very hot and sunny you should run it for four hours for the 16’x48″ pool.
