What is eats System on Mack truck?

What is eats System on Mack truck?

Mack’s exhaust aftertreatment systems (EATS) are built to protect the environment without sacrificing performance or reliability. From selective catalytic reduction to diesel particulate filters and more, Mack EATS do right by the planet and your business.

How long does a parked regen take Mack?

A Parked Regeneration will stop if the key is turned to the off position, the truck is put into gear or the parking brake is released. The regeneration will take approximately 20-40 min. The regeneration is complete when the engine returns to low idle and the DPF lamp remains off.

How long does a regen take on a Mack truck?

A forced regen occurs when soot builds up inside the diesel particulate filter (DPF) to the point that the vehicle is no longer operable. When this happens, a driver has to pull over and initiate a self-cleaning process that can take up to 40 minutes — valuable time that could have been spent on the road.

How do I change the idle speed of my Mack truck?

To engage, the operator first presses the “Cruise On” cruise control switch. The Cruise light will come on in the cluster. Then press and release the “Set” switch (just like you would do when operating the cruise control feature). This will activate the feature and set the engine idle speed to 1100 rpm’s.

How do I make my truck idle higher?

Turn the idle screw, now exposed from the protective rubber coating, in order to adjust the idle. Loosen the screw in a counter-clockwise fashion to increase idle speed or tighten it in a clockwise manner in order to decrease the idle speed. Ideally, you will want the idle to rest at 650 RPM.

How long does it take a Mack truck to Regen?

How long does a truck Regen take? Truck regenerations take approximately twenty to sixty minutes, depending on the type of regen, the amount of build-up, and engine type.

How does diesel aftertreatment work?

How does an aftertreatment system work? The exhaust progresses from the Decomposition Reactor into the SCR system which converts the toxic NOx and urea mixture into harmless nitrogen gas (N2) and water vapor (H2O), which effectively eliminates harmful emissions resulting in near zero emissions from the exhaust.

What are the specs of a Mack cl713 dump truck?

2002 Mack CL713 460 Hp Eaton 8 LL TriAxle Dump Truck 17 x 70 Aluminum Dump Body 4.42 Ratio Camel Spring Suspension 385 front and lift axles Single owner Well Maintained Ready work everyday… See More Details NICE RUNNING TRUCK, 385/22.5 STEER TIRES, DROP AXLE TIRE AT 80%, HTD MIRRORS, CRUISE CONTROL.

How do I disable the stability system on a Mack vehicle?

Additionally, if a MACK factory-installed liftable axle must be removed from an RSA-equipped chassis, the stability system must also be disabled by having a qualified technician replace the Advanced EC-80™ electronic control unit (ECU) with a Premium EC-80™ ECU.

What kind of engine does a Mack CL 723 have?

Mack CL 723, 1994 log truck, Mack 6cyl E-400, fuller 18 speed, Hendrickson spring suspension, 120 prentice loader with serco grapple. We’re sorry, we could not issue pre-approval based on the information provided.

How much does a Mack CHN bumper cost?

Starting At 391.99 Chrome Steel Bumper For 2005 to 2007 Mack CHN 613 Set Forward Axle. Choose your Options to Complete Your Bumper. Details / Specifica… Starting At 328.99 Chrome Steel Bumper For 1989 Mack Western Contractor Conv., RD688, RD690. Choose your Options to Complete Your Bumper.