Can aluminum blinds be cut to size?
Can aluminum blinds be cut to size?
If You Really Want to Cut Your Own Blinds, you need a power saw and a pair of tin snips. The headrail is usually made of aluminum. You can cut it with a pair of tin snips or a hacksaw. Tin snips also leave behind metal burrs that can cut you.
How much can you trim off Venetian blinds?
Subtract the width of the window from the headrail measurement. This is the amount you need to trim. Divide the amount in half if it’s more than 2 inches so you can cut 1/2 of the extra width from each side. If it’s smaller than that, you can cut it all from one side.
Can you cut Venetian blinds with scissors?
You should be able to cut aluminium and pvc slats with a pair of strong and sharp scissors or maybe tin snips if you have them. The slats from wood venetian blinds can be cut individually with a hand panel or jigsaw but for the best results all the slats should be cut together with a powered chop saw or bench saw.
Can I use a chop saw to cut blinds?
Put your blinds in your chop saw (miter saw), make sure you get it lined up exactly where you want it. Remember, when you cut, the saw blade will take away a teeny bit extra, so make sure you’ve got the blade lined up on the outside of your line. Also, MAKE SURE all your blinds strings are away from the saw.
What saw to cut Venetian blinds?
Cut the blind slats and bottom rail using a circular saw or table saw. For plastic blinds, you might even be able to use a powerful set of sheers. Confirm that all slats, the headrail, and the bottom rail are cut at the same length.
How do you cut metal Venetian blinds?
Be sure to leave enough room for the blinds to fit inside of the window; leaving about a quarter of an inch on either side will suffice. Once you have measured the window, you need to take a saw that is able to cut cleanly through metal in order to not destroy your metal venetian blinds.
Can Venetian blinds be shortened?
Venetian blinds can be shortened easily once you’ve determined the correct number of slats to remove. Discover how to shorten your Venetian blinds with instructions from a blinds and window coverings specialist in this free video on window blinds. Bio: Bill Walker has owned his own blinds and window coverings business for more than 10 years.
Can you cut the top off of blinds?
Use the measurement found above and mark the headrail (the top of the blinds) at this length. You may either cut an even amount off of both sides or cut only from the pull cord side. If the chords are on one side, you can cut only from the other side.
How do you cut blind slats to length?
Once you’ve created your line, slide the slats away from the headrail, if possible. Cut the blind slats and bottom rail using a circular saw or table saw. For plastic blinds, you might even be able to use a powerful set of sheers. Confirm that all slats, the headrail, and the bottom rail are cut at the same length.
