Does Dupont still make Imron paint?

Does Dupont still make Imron paint?

Yes, even in that time there was a need for durable, quick-drying, multicolor lacquer automotive paint. Dupont Automotive Finishes started trading in 1920 and eventually merged with Herberts in 1999. They are the current manufacturers of Imron Paint.

Is Imron paint good for boats?

Imron MS600 is an air dry product recommended for above the water line marine applications where excellent appearance, durability, sag resistance, and ease of use are required.

How do you mix Imron paint?

Thoroughly mix 8 parts Imron 3.5 SG + (RM), Imron 3.5 ST + (RA), or Imron 3.5 FT+ (RF), then add 1 part Imron 9T00-A Activator while stirring. If using a mix formula, follow specific color formula for color desired. Measure out appropriate amounts, add activator and mix thoroughly.

How much does a gallon of Imron paint cost?

Pricing varies with the colors; Whites being the least expensive pricing around $66 a gallon to Reds as much as $185. a gallon. Annex paint can color match any straight color or sheen you may require. Imron is is not designed for metalics or pearls, these however can be made with automotive materials.

Is Imron good paint?

Imron paint boasts the highest durability levels, outstanding graffiti performance on topcoats and clears, reliable corrosion protection and excellent resistance to chemicals and weathering, as well as shock and impact.

Can you clear coat Imron?

A two-component, high-performance, easy-to-use clearcoat designed for overall applications. It delivers a premium appearance with excellent durability and chemical resistance. Highly recommended for accounts with force dry capabilities.

What is AwlGrip paint?

Awlgrip Topcoat, also referred to as awlgrip paint, is a polyester based high gloss polyurethane topcoat giving long lasting gloss and color retention. It is considered the among the best Topside Paints in the marine industry. AwlGrip Topcoat may be applied by brush/roller or spray.

What kind of paint is Imron?

Imron paint is a high-quality polyurethane paint manufactured by Dupont. It is used as an industrial paint for trucks, boats, airplanes, and other commercial vehicles. The different types of Imron can be applied with a brush, a roller, or as a spray.

How long does it take for Imron paint to dry?

Sanding is recommended for recoating if the topcoat has been air-dried more than 16 hours or force dried. 30 min at 140-160°F (60-71°C) after a 15 minute flash time following application of final coat.

Is Imron a urethane paint?

Polyurethane paint For decades, Imron polyurethane enamel has been the finish of choice for leading heavy-duty truck, bus and rail manufacturers. All that translates into a very consistent, easy-to-use and productive paint system.

Is Imron paint safe?

It’s one of the most dangerous paints ever made. It can kill you if you mix and wear improper safety equipment when spraying. You need a continuously supplied fresh air breathing system with proper fume collection just for starters.

How do I apply Imron MS600 to my equipment?

See technical data sheet for complete instructions. Imron MS600 can be applied with conventional, HVLP, air-assisted airless, and electrostatic spray equipment using pressure or gravity fluid delivery.

When should Imron MS600 be used with Corlar® 18510s™ epoxy primer?

Imron MS600 is recommended for use with Corlar® 18510S™ Epoxy Primer for maximum topcoat appearance. It may be used over most aged and hard cured coatings in good condition. See technical data sheet for complete instructions.

How do you add activator to Imron?

Thoroughly mix all colored portions until uniform. To 4 parts 33-XXXXX base or Imron 3.5 HG + (RH quality) mixing formula, add 1 part 9T00-A Activator. If using a mix formula, follow specific color formulas for color desired. Measure out appropriate amounts, add activator and mix thoroughly. DO