What is a NP271 transfer case?
What is a NP271 transfer case?
The NP271 transfer case is chain driven with an aluminum casing, having two gears and a six pinion planetary gear set. It is used for heavier duty applications, such as the Ford F-Series, from the 250 and above, as well as the Ford Excursion.
How much does NP271 weigh?
This heavy duty design is rated at gross vehicle weight of 17,500 lbs in vehicles with 5.3 L to 7.3 L diesels. The NP271 is a heavy duty version has a 6 pinion planet and utilizes a 1.5″ wide chain, designed specifically for durability with emphasis for high strength and long-term durabiliity.
What is a Ford transfer case?
New, Used, and Remanufactured Ford Transfer Cases At the heart of a these systems is a transfer case, an important component that transfers power from a vehicle’s transmission to the front and rear axles via drive shafts, thereby powering both axles at the same time and providing 4WD and AWD.
How much does an np203 transfer case weigh?
New Process NP203 Specs
| Manufacturer: | New Process Gear | |
|---|---|---|
| Gear Ratios: | Low Range | 2.00 : 1 |
| Fluid Type/Spec: | 10w-30 motor oil | |
| Weight: | 160 – 170 lbs dry | |
| Identification: | Transfer case ID tag located on front of case above 4WD output shaft |
How much does a NP205 transfer case weight?
This transfer case is considered by most people to be nearly indestructible in most applications. The cast iron housing combined with beefy internals puts this case weight at nearly 140 pounds dry. High-range gearing is 1:1, and the NP205 has a low-range ratio of 1.96:1.
How do I know what Ford transfer case I have?
The BorgWarner identification tag is typically located on the rear of the transfer case just below the output shaft. BorgWarner Model Number: The first four digits of this sequence identifies the transfer case model.
How do I identify a transfer case NP203?
The model tag (if it still exists) will be found on the front of the chain case above the front output shaft. It will list the model number, the manufacture date and the gear ratio.
How much does a 203 Transfer Case Weight?
How much does a 208 transfer case weigh?
New Process NP208 Specs
| Manufacturer: | New Process Gear | |
|---|---|---|
| Gear Ratios: | High Range | 1.00 : 1 |
| Low Range | 2.61 : 1 | |
| Fluid Type/Spec: | Automatic transmission fluid (ATF) | |
| Weight: | 75 – 80 lbs dry |
What is the Ford np271 transfer case ratio?
The NP271 has 2.72:1 ratio, and has a aluminum case has either 4WD partl-time manual shift. The units have different input spline counts: Dodges have 23 and 29 spline inputs. Ford uses 24 spline with manual transmissions and 31 and 34 spline units. Both Dodge and Ford NP271 transfer cases have driveside drops.
What kind of transfer case does a Dodge F250 have?
Transfer Cases are tested pNP271 dodge and ford transfer case replacements and partsrior to leaving the factory. This model is a chain driven manual shift and part time transfer case. The output is on the driver-side with center rear output. This unit has been utilized in Dodge and Ford pickup trucks F250, F350, F450 and F550 from1999-Up.
When did the nv271 transfer case come out for the F350?
I n 1998 NVG introduced the NV271 transfer case incorporated into the Ford Motors F250, F350, F450 and F550 vehicles. Dodge started shipping this transfer case is some of it’s models in 2003. Give us a call toll free at 800-216-1632 and let us help you same time and money,
What kind of fluid goes in a Dodge np271 transfer case?
Both Dodge and Ford NP271 transfer cases have driveside drops. Recommended fluid is Automatic Transmission Fluid ATF. We can easily supply a rebuilt NP271 transfer cases with a two year warranty we additional offer every part required to rebuild your unit, we have new parts we can also provide good used takeout parts to save you money!
