Why is my Kevo not connecting?
Why is my Kevo not connecting?
Check to make sure the Kevo app is running. If you have verified that your Bluetooth function is turned on and your lock is still unresponsive, your Bluetooth Sharing may have been turned off. Verify that sharing is turned on for the Kevo app. If it is not already on, simply tap the on-off switch to turn it on.
How do I connect my Kwikset lock to Bluetooth?
Navigate to Bluetooth Sharing inside your Settings menu (Settings > Privacy > Bluetooth Sharing). 2. Verify that sharing is turned on for the Kevo app. If it is not already on, simply tap the on-off switch to turn it on.
How do I pair my phone to my Kevo?
How can I pair a device to the Kevo Contemporary?
- For Android, select (+) sign (bottom right) on the main page, select “Pair A Device”.
- For iOS, select (+) sign (upper right) on the main page, select “Pair a Device”.
- Press the “Pair a Device” on the following page.
- Select the brand, then the product.
How do I reset my Kevo lock?
If you wish to reset your Kevo, press and hold down the reset button for 10 seconds until the lock beeps and the lock face LEDs flash red. Note: You will need to re-enroll your Owner phone and fobs, and you will need to resend eKeys to your Kevo users.
How do I reset my Kwikset?
If you wish to perform a system reset, press and hold the Reset button on the back panel for 10 seconds until the lock beeps. WARNING: Resetting your Kevo system will restore your lock to factory settings and delete all smartphones from Kevo’s memory. After a system reset, you will need to re-enroll your Owner phone.
How do I pair my Kwikset 916?
- Make sure the door is open. Press the Program button once.
- Press checkmark symbol once.
- Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.
- Press lock symbol once.
Why is my Kwikset lock not syncing?
If the lock has already been installed on the door, remove the interior assembly from the mounting plate. Make sure the batteries are installed, and bring the interior assembly next to the controller. Reinstall the battery pack. Perform the pairing process while the interior and exterior are connected.
