What kind of transmission fluid does Ford use?
What kind of transmission fluid does Ford use?
Dexron III/Mercon – This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports.
Is Type F transmission fluid the same as Mercon?
Mercon is a suitable replacement for Type H and Type CJ fluid, but not for Type F. Mercon V—the most common Ford ATF in late model Fords, it is very much like Dexron III. Should not be used in a transmission requiring Ford Type F. Mercon LV—the latest Ford ATF, it is factory fill in 2008 and later Fords.
What is the viscosity of transmission fluid?
Transmission Fluid is essentially thin hydraulic oil. In order to effectively lubricate the delicate parts of the system, the viscosity of the oil is kept low – generally around 0W/5 or 5W/10. Most importantly it needs to be relatively free flowing in order to transmit power from the engine to the transmission.
Is ATF transmission fluid the same as Type F?
General Motors referred to its ATF as Dexron II and Ford’s specified fluid was labeled Mercon. Ford first produced its own ATF in 1967 and referred to as Type F. This fluid was used in all Ford transmissions until 1977 and most Ford transmissions until 1980.
Does it matter what type of transmission fluid you use?
Some transmission fluids are very incompatible with different transmission types as they use different additives in the fluids. Your car transmission needs the correct fluid, as specified by your car manufacturer, to run correctly and to the fullest length of life.
Can I mix Type F and Dexron?
As to ATF, no problem mixing Dexron and Type F, one can actually fine tune shift harshness as Type F is in fact “grippier”.
What happens if you put the wrong type of transmission fluid in your car?
Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.
What viscosity is dexron 3?
Performance Specifications
| TYPICAL PROPERTIES | ATF |
|---|---|
| KINEMATIC VISCOSITY CST @ 40°C | 37 |
| KINEMATIC VISCOSITY CST @ 100°C | 7.3 |
| VISCOSITY INDEX (D2270) | 173 |
| BROOKFIELD VISCOSITY @ -40°C | 17000 |
Is Thicker transmission fluid better?
Proper Viscosity Your transmission fluid shouldn’t be too thick or sluggish. It should be pretty thin and less viscous than motor oil meaning thinner than motor oil.
What can I use in place of Type F transmission fluid?
This type of drive train fluid should not be used in automatics that require Type F. It can be replaced with Mercon or Mercon V specification.
How much transmission fluid does a Ford f250 need?
When equipped with an automatic transmission, the Ford F-250 requires 17.6 quarts of transmission fluid or 11.7 quarts with a manual transmission.
