What does FDL mean on a washing machine?
What does FDL mean on a washing machine?
FdL or F29 Error code means: The door cannot unlock. Firmly press the door in the area of the door lock.
What does code FDL mean?
If you see “Fdl” or “Fdu” error codes, these are usually indications of a failed door latch assembly and will require replacement. You can also try to reset the CCU by unplugging the washer for AT LEAST 30 minutes. Hope that helps.
What does F DL mean on a Kenmore washer?
The Fdl error code indicates that the washer door cannot be locked. This is usually due to a door lock mechanism failure. It can also be caused by a wiring problem or machine control board failure.
How do you fix an F code on a Whirlpool washer?
An F/dL error code indicates a problem with the door lock. The error code will pop up when the door fails to lock. The washer will display the error code after six attempts to lock the door. To fix the issue, the door lock assembly needs to be inspected for loose or broken wires and other signs of damage.
What does DL mean on Maytag washer?
Door Lock Error
Maytag F/dL – Door Lock Error A Door Lock Error occurs if the door cannot be unlocked. It will try to lock it 6 times before displaying the error.
Why does my Whirlpool washer say DL?
The Whirlpool washer dL error code is a door lock error. When you start a cycle the ACU ( main control board) will attempt to lock the door up to 6 times. Check for loose connections on the wiring from the door lock switch assembly to the ACU ( main control board).
What does DL mean on Whirlpool Cabrio?
The Whirlpool washer dL error code is a door lock error. When you start a cycle the ACU ( main control board) will attempt to lock the door up to 6 times.
Why does my Whirlpool washer say dL?
How do you unlock a Kenmore front load washer?
How to Manually Unlock a Kenmore Front Load Washing Machine
- Touch “Control Lock” for five seconds until “CL” disappears from the washer’s display to unlock the control panel.
- Press “Start/Pause” to manually pause the cleaning cycle.
- Pull the door’s handle to open the door and add or remove the clothing from the washer.
Why does my washer say F?
The F indicates that the washer control detected a component problem. If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
What is DL error in IFB washing machine?
Check if ‘dLEr (door lock error)’ message is displayed. If yes, switch OFF the machine for 2 minutes and then try opening the door again. Don’t forcibly open it. Disable Child Lock; wait for 1-2 minutes till door symbol glows on the display.
