How many AcuRite sensors can I have?

How many AcuRite sensors can I have?

7 sensors
The Acurite Access® can accept up to 7 sensors.

How do you sync AcuRite weather station?

Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord. Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button for 20 seconds if applicable. Reinstall the batteries in the outdoor sensor.

Why does my AcuRite thermometer blink?

showing dashes Flashing of the outdoor temperature is generally an indication of wireless interference. 1. Bring both the sensor and display unit indoors and remove at least one battery from each.

How do I reset my AcuRite remote sensor?

Remove all batteries from the sensor (or sensors). Remove all batteries from the display then press and hold the reset button for 20 seconds if applicable. Wait 1 minute to ensure that any remaining battery power has discharged from both units. Reinstall batteries in the outdoor sensor (or sensors) first.

What does the AcuRite Access do?

An AcuRite Access® is a stand-alone device that sends readings from AcuRite sensors to My AcuRite® over your network (Internet) connection. The Access device supports up to seven (7) compatible AcuRite sensors.

How do I connect my AcuRite to the Internet?

How can you get started? Step 1: Plug in your AcuRite Access® and install batteries into your compatible AcuRite sensors, connect your PC Connect Display to the computer with the PC Connect software running, or connect your Direct to Wi-Fi display to your Wi-Fi network.

How do you set up Acu Rite?

  1. 1 INSTALL SENSOR BATTERIES. In the outdoor sensor battery compartment, install four AA alkaline or lithium* batteries.
  2. 2 PLUG IN DISPLAY AND CONFIGURE.
  3. 3 MOUNT SENSOR. Find a suitable place outdoors to mount the AcuRite Iris.
  4. 2 ACCESS WI-FI SETUP PAGE.
  5. 3 ADD YOUR WI-FI CREDENTIALS.
  6. 4 SET UP YOUR MY ACURITE ACCOUNT.

How do I sync my AcuRite sensor?

Synchronize the units:

  1. Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
  2. Change A-B-C switch on both units to a new matching A-B-C channel then press and hold the reset button on the display for 20 seconds.

How do you sync AcuRite temperature sensor?

Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize.

Where should I place my AcuRite sensor?

The best location is 4 to 8 feet above the ground with permanent shade and plenty of fresh air to circulate around the sensor. To ensure accurate temperature measurement, place sensor out of direct sunlight and away from any heat sources. Outdoor sensor must be within 330 ft (100 m) of companion unit (not included).

How many sensors are on an acurite thermometer?

With indoor/outdoor temperature from three remote sensors. This AcuRite Digital Indoor/Outdoor Thermometer features accurate, reliable temperature readings. The bold, easy to read LCD screen displays the current indoor and outdoor temperature with oversized digits and features daily high and low records.

What can PLUSPLUS replace for acurite products?

Plus replace parts such as temperature probes, power adapters and USB cables for AcuRite products. Plus, explore AcuRite’s range of weather stations, thermometers, hygrometers, portable weather devices and more.

Why choose acurite?

AcuRite provides you with the leading weather stations and home monitoring devices to ensure your home is equipped with the home technology it needs to run efficiently inside and outdoors.

What does acurite weather station measure?

Our weather devices assist you in measuring key data such as rainfall, temperature, humidity, heat index, dew point and barometric pressure. AcuRite provides you with the leading weather stations and home monitoring devices to ensure your home is equipped with the home technology it needs to run efficiently inside and outdoors.

author

Back to Top