Do you need a damper in a wood stove pipe?
Do you need a damper in a wood stove pipe?
Newer models of wood stove don’t typically require a damper. A damper was traditionally used on older, less efficient, models of stove to help reduce the flow of air leaving the firebox. Certified modern stoves meet stringent regulations and typically won’t need a damper to perform well.
How close to stove should damper be?
approximately 12 to 18 inches
A damper is usually located approximately 12 to 18 inches from the stove, prior to the spot where the pipe exits into a chimney, if present. The damper retains heat that escapes up the chimney or flue. It allows this heat to dissipate into the area being heated by the woodstove.
Can you leave door open on wood burning stove?
Wood burning stoves are not designed to be used with the door open. You can use a wood burning stove with the door open but doing so will lose the control of the air flow into the stove, making it operate less efficiently and sending more heat up the chimney rather than out into the room.
Does a wood stove need a damper?
When something like a wood stove is being used, the damper needs to be open. If the damper is not open, exhaust gases can build up and push out into the room. In addition to filling the room with smoke, this can be a health hazard, because byproducts of combustion are not healthy to inhale.
Do stove inserts need a damper?
Modern stoves usually do not need a damper. No Damper, block off plate assembly top and bottom with new liner passing through. Bottom block off plate very important or you will be back singing the blues. The answer may be in your insert installation instructions.
What is the purpose of a damper on a fireplace?
Fire dampers are used to help stop the passage of fire through the vents and ductwork systems. This helps to ensure that the fire does not spread to other parts of the building. The British Standard 9999 Code of practice for Fire Safety requires buildings that contain ducting of any kind must have them fitted with fire dampers.
What is the use of a damper in a boiler?
You can improve the efficiency of your boiler by installing an in-line vent damper. These are used to automatically shut off the vents to your boiler when they do not need to be open. By shutting off the vents when the boiler is not firing, you can help retain heat inside the house.
