When should I change an Allison internal filter?
When should I change an Allison internal filter?
Beginning with s/n 6510670912 and s/n 6610205144, transmissions equipped with allison high Capacity Filters do not require an initial main Filter change at 5000 miles/8000 km/200 hours.
How many filters does Allison Transmission have?
Both the main and lube filters have identical part numbers and are commonly sold as a two-filter kit, complete with the necessary gaskets and O-rings. Allison 3000 transmissions can hold approximately 29 quarts of fluid; the larger Allison 4000 can hold approximately 48 quarts.
Do you need to change internal filter on Allison Transmission?
The internal filter should be changed every 75,000 to 100,000 miles. FAQ: How can I tell if My Allison 1000 has a DEEP pan or a Shallow pan? The quick answer is to look at the profile of your transmission pan.
How often should you change Allison 1000 transmission fluid?
Although GM recommends the Allison 1000 trans fluid and external filter be changed when the HD’s oil monitor says – or every 25,000 miles for HDs used in severe service – Rod Halsten, a GM master technician in Tuscaloosa, Alabama, says let the trans fluid color and smell be the fluid-change indicators.
Which Allison Transmission do I have?
Transmission serial numbers can be found on the Transmission data plate. The serial number of an Allison transmission may be located on the transmission data plate. This can be located on the side of the transmission. This data plate is usually found on the lower rear face of the rear housing.
Are all Allison transmission filters the same?
The Allison 29539579 Spin-On Transmission Filter is not vehicle specific, but actually transmission specific. The Allison 29539579 Spin-On Transmission Filter will fit all Allison 1000, 2000, 2400 Series Transmissions. Yes, the ALLISON 29539579 SPIN-ON TRANSMISSION FILTER will fit all A1000 transmissions.
How do I reset my Allison Transmission Control Module?
Steps to Resetting Transmission Control Module
- Step 1: Turning Key Position.
- Step 2: Press gas pedal.
- Step 3: Keep Waiting.
- Step 4: Turning the Key Off.
- Step 5: Releasing Gas Pedal.
- Step 6: Wait Again.
- Step 7: Ready.
- Identification.
What fluid does Allison Transmission use?
TES-295
Advanced technology synthetic automatic transmission fluid Mobil Delvac 1 ATF is a fully synthetic fluid recommended by Allison Transmission, Inc. and approved against the Allison TES-295 and TES-468 Specifications. The fluid is designed to meet the demanding requirements of modern heavy-duty automatic transmissions.
What kind of transmission does an Allison 3000 MH have?
A BRIEF DESCRIPTION OF THE ALLISON 3000 MH, 4000 MH SERIES TRANSMISSIONS Included in the Allison On-Highway Transmission family are the 3000 MH and 4000 MH Series transmissions. The transmissions described in this handbook include the WTEC III control system, a torque converter with lockup and torsion damper, and three planetary gear sets.
What are the different parts of Allison 3000 series?
Allison 3000 Series, MD3060, MD3656 HARD PARTS 801A Piston, Lock-up Apply (MD3060) 1 MD3060.PIS01 NI Cover/Diaphragm With Seal (Converter) ….. 1 AT3000.COV01 806A Rollers, Converter One Way Clutch ….. 13 AT3000.OWC01 832E Filler Tube ….. 1 MD3060.TU01 Ni Washer, Stator OWC Front …..
What are the service procedures recommended by Allison Transmission?
The service procedures recommended by Allison Transmission (or the vehicle manufacturer) and described in this manual are effective methods for performing service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended.
