What sockets do BMW use?
What sockets do BMW use?
3/8″ Drive External Torx Socket Set. BMW engines use the E-torx hardware throughout the engine, this is a must have for anyone doing engine work on their BMW.
What size Torx does BMW use?
Torx 25 and 30 will suffice for the majority of applications.
Does BMW use Torx?
Premium Member And,…don’t forget about the Security Torx bits and screws as well. The screws have a post in the center and need a bit that has a center hole in it. TG, BMW doesn’t use those.
What is an e-Torx socket?
An External Torx version exists, where the screw head has the shape of a Torx screwdriver bit, and a Torx socket is used to drive it. The external “E” Torx nominal sizing does not correlate to the “T” size, (e.g. an E40 socket is too large to fit a T40 Torx bit, while an E8 Torx socket will fit a T40 Torx bit).
Can you use Torx Plus on Torx?
Torx Plus addresses the limitations of the existing Torx system to provide optimal torque transfer and maximises tool lifetime. Torx Drive tools can be used to remove and reinstall Torx Plus recess fasteners.
What sizes do e-Torx sockets come in?
For use with External TORX Head Type Bolts.
| Socket E-Size | Inch | Metric |
|---|---|---|
| E- 4 | .15″ | 3.8mm |
| E- 5 | .18″ | 4.7mm |
| E- 6 | .22″ | 5.6mm |
| E- 7 | .24″ | 6.1mm |
How many spark plugs does a BMW 335i have?
Spark Plugs – Set Of Six Directly from the factory.
Where are Torx Plus used?
Torx Plus is designed for high torque transmission. This means that higher torques can be used to securely tighten fasteners without incurring additional wear and tear on the tools.
How much does it cost to replace a BMW N52 drive belt?
The BMW N52 Drive Belt Kit that we sell on our website comes with every part you’ll need to complete this job for just under $80. While the parts won’t have BMW’s stamp on them, they come from the same company that supplies BMW with their parts. How long will it take to replace the serpentine belt system on a BMW N52 engine?
How do you replace the drive belt on a BMW?
BMW’s longitudinal engine layout places the belts at the front and center of the engine bay. To get to them, you’ll remove the fan assembly and the intake airbox. Once you can access the drive belt system, you’ll only need to remove two bolts to remove the parts that you’re replacing.
How much torque does a BMW N52 serpentine belt have?
BMW N52 serpentine belt system torque specs: BMW Idler Pulley Bolt = 40Nm or 29.5 ft-lbs, of torque BMW Belt Tensioner Bolt = 25Nm or 18.4 ft-lbs, of torque plus 90° And there you have it; a complete guide to a drive belt system change on your BMW’s N52 engine!
