What Cable to use for word clock?
What Cable to use for word clock?
The word clock jacks use standard 75 ohm BNC connectors, and standard 75 ohm coaxial cable should be used (coaxial television cable, not shielded mic cable).
What is word clock audio?
In digital audio electronics, a word clock or wordclock (sometimes sample clock, which can have a broader meaning) is a clock signal used to synchronise other devices, such as digital audio tape machines and compact disc players, which interconnect via digital audio signals.
What is the time letter?
How to say the time in English – Examples and Reference
| Digital | Normal Use | Timetables, TV, etc. |
|---|---|---|
| 6:00 | It’s 6 o’clock. | |
| 6:05 | It’s 5 past 6. | It’s six oh five. |
| 6:15 | It’s quarter past 6. | It’s six fifteen. |
| 6:30 | It’s half past 6. | It’s six thirty. |
How do you write AM and PM in British English?
Rules
- Lowercase a.m. and p.m. and always use periods.
- Lowercase noon and midnight.
- Do not use 12 noon or 12 midnight (redundant). Use noon or midnight.
- Do not use 12 p.m. or 12 a.m. Use noon or midnight.
- Do not use 8 a.m. in the morning (redundant) Use 8 a.m.
- Do not use o’clock with a.m. or p.m.
Is word clock necessary?
In more elaborate digital audio systems, a master clock can make the task of slaving multiple units much easier and neater, and allow the system to operate more reliably. In systems where digital audio is being used in synchronism with video, an appropriate master clock is absolutely essential.
What is considered good audio latency?
While some keyboardists claim to hear a 5ms discrepancy in their performances, the vast majority of musicians are unlikely to worry about 10ms, and many should find a latency of 23ms or more perfectly acceptable with most sounds, especially pads with longer attacks.
Where is word clock used?
Word clock is used by the receiving digital device to lock to the incoming digital signal. Every digital device, from a simple, portable CD player to a Pro Tools HD rig, has a word clock. Not to be confused with sync clock (like MTC or SMPTE), word clock is what tells an A/D or D/A converter when to begin each sample.
What is the correct way to write AM and PM?
The first and most common way to write them is with lowercase “a.m.” and “p.m.” This way requires periods, and both Chicago Style and AP Style recommend this way of writing the abbreviations. This subway train will leave daily at 10:05 a.m. After 10:00 p.m. I really need to sleep.
Can ADAT carry word clock?
So if you’re setting up the the 1824c so that it syncs to the ADAT input, then you shouldn’t connect the word clocks together. However, because ADAT optical sync is more prone to jitter than word clock [internal reflections vs. standing waves], it’s possible that using the word clock setup might sound better.
