How much does a Dana 60 axle cost?
How much does a Dana 60 axle cost?
FRONT AXLES
| Brand | Series | Price* |
|---|---|---|
| Dynatrac | ProRock60 | $8,000 |
| Currie | RockJock III 60 | $5,550 |
| TeraFlex | Tera60 | $8,900 |
| Spicer | Ultimate Dana 60 | $7,000 |
Which is better Dana 44 or Dana 60?
Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. The Dana 44 is also a heavy axle, but it’s significantly lighter than a Dana 60. The ring gear on the Dana 44 measures anywhere from 8.5 to 8.8 inches depending on the truck.
Are all Dana 60s the same?
There are three major variations of the Dana 60 axle used in the 1960s to 1980s. GMC, Chevy, and Jeep are all basically the same. There are three major variations of the Dana 60 axle used in the 1960s, 70s, and 80s: Dana 60 axles on the GMC, Chevy, and Jeep are all basically the same.
How much does a complete Dana 60 weigh?
Since there are many different variations of Dana 60 and 70 axles, we can’t give those axles a certain weight. However, a rear Dana 60 axle usually weighs about 400 pounds, a front Dana 60 will weigh about 500 lbs, and the Dana 70 is similar in weight to the 14 bolt.
Who makes a Dana 60?
Dana Corp
General specifications. Every Dana 60 that was originally manufactured by Dana Corp (i.e. not aftermarket) is stamped with a build date and bill of materials on the back of the right hand axle tube. Ring gear measures 93⁄4″.
Are Dana 60 limited slip?
The passenger car version of the Dana 60 came equipped with the Mopar “Powr-Lok” semi-float limited-slip differential option from 1966 to ’69. The Powr-Lok differential used 30-spline axles. The axle bearings, seals and retainer packages are interchangeable.
How much wider is a Dana 60 than a Dana 44?
Although the Dana 44 and Dana 60 differential covers look similar, their sizes are significantly different. The Dana 44 differential cover will measure about 9 1/2 inches wide and 10 1/2 inches tall, while the Dana 60 differential cover will measure about 11 1/4 inches wide and 12 inches tall.
Is a Dana 60 limited slip?
Do I have a Dana 60 or Dana 70 axle?
Before ordering a brake kit, you want to be sure that you have a Dana 60 axle. Sometimes people believe that they have a Dana 60 axle while they really have a Dana 70 axle. Luckily, it’s pretty easy to tell which axle you have. The original factory axles in a Full Float Dana 60 always have 30 splines or less.
What is the Ford Dana 60 bolt pattern?
The Ford Dana 60 bolt pattern is only about 1/4″ out of square, so it’s nearly impossible to eyeball. Not Sure Whether You Have a Dana 60 or Dana 70 Axle? Before ordering a brake kit, you want to be sure that you have a Dana 60 axle. Sometimes people believe that they have a Dana 60 axle while they really have a Dana 70 axle.
What is the ultimate Dana 44™ front axle?
From the Spicer® nickel chromoly steel axle shafts to the Spicer® performance differential cover to the SPL® 1350 axle shaft universal joints, the Ultimate Dana 44™ front axle is built to deliver for people who rely on their Jeep® Wrangler® JK. In addition, the axle is equipped with the following features and benefits.
What different crate axles are available from Dana?
SIX different Crate Axles ARE CURRENTLY available from Dana. These include: The Ultimate Dana 44™ axle is a direct bolt-in solution that delivers optimal strength, durability, and performance.
