How do I reset my SL500?
How do I reset my SL500?
From year: 2004.
- Turn on the ignition (standard display of the control system appears).
- Press the reset knob (1 button) for about 4 seconds.
- .
- This message appears in the tachometer: SERVICE INTERVAL.
- To confirm hold down the reset button until you hear a signal.
- The service indicator now displays the reset interval.
What would cause a car radio to not turn on?
Blown Fuse: One of the most common reasons for a car radio to stop working is a blown fuse. If the radio itself will not turn on, chances are good that there’s one or more blown fuses causing the problem.
Why does my car radio not have power?
The most likely cause of a stereo not powering up is a blown fuse. Other causes can be a short in the wiring or other wiring problems. Cars are unforgiving environments for electronics, and vibration, heat and dust can all cause premature failure. Vibration can cause wiring to become loose.
What to do if your Mercedes-Benz COMAND Radio is not working?
Are you having trouble with a non-working radio on your Mercedes-Benz? We have listed down common issues with the Mercedes-Benz COMAND system, including problems with The most common solution to fix any of these issues is to try to perform a soft reset of the COMAND unit.
What should I do if my Mercedes-Benz key fuses stop working?
Take out the key from the ignition and don’t turn on the car for at least 15 minutes. Take note: The fuse number will depend on the model of Mercedes-Benz that you have.
What to do if your Mercedes COMAND audio gateway is defective?
You need to figure out which component is defective by bypassing each component until you find the problem. The Audio Gateway is the brains of the Mercedes-Benz COMAND system. You will need to have an authorized Mercedes-Benz service technician replace the whole unit if AGW is defective.
