How do I update Power Commander V firmware?
How do I update Power Commander V firmware?
Updating the Firmware on Power Commander V
- Select Power Commander Tools > Configure > Update Firmware.
- Browse to the location of the firmware file.
- Select the file.
- Click Open.
Does Power Commander V have AutoTune?
Once installed, the AutoTune kit monitors the air/fuel ratio. It then sends this information to the Power Commander V and automatically corrects it as you ride, letting you feel the changes as they happen.
What does the Power Commander Auto Tune do?
How do I know if my Dynojet AutoTune is working?
The easiest way to determine if the AutoTune is working is to go for a ride, come back, plug the Power Commander into a computer and look at the trim table(s). If there are values in any cell other than zero, AutoTune is working. If the table is all zeros, AutoTune is NOT working.
How much horsepower will a Power Commander add?
The Power Commander is a tuning tool to adjust fuel, and on some models ignition timing. Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque.
What can a Power Commander 5 do?
The Power Commander V is a unique EFI tuning device because it can monitor and maintain your air/fuel ratio without directly changing the ECU. To reinstate your stock settings, all you need to do is uninstall the device, and you’re done.
How do you AutoTune dynojet?
**AutoTune Instructions for Dynojet Power Vision Harley Davidson motorcycles**
- Turn Ignition switch and Run switch to ON position.
- From main screen select PROGRAM VEHICLE then touch ACCEPT.
- Choose AUTOTUNE to to enter the main Auto Tune screen.
- To enable Auto Tune select ENABLE AT which brings up the Tune Manager.
