Trending

How do I factory reset my Plantronics Voyager?

author 0

How do I factory reset my Plantronics Voyager?

Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware. Step 4. Power back up as normal.

How do I reset my Plantronics sensor?

How do I reset the Smart Sensors on my BackBeat PRO headset?

  1. Connect your headphones to the USB port on your computer using the charging cable.
  2. Lay the headphones on a non-metallic surface and wait at least 10 seconds.
  3. Disconnect the headphones and try the sensor features again.

How do I reset my PLT Voyager 5200?

Reset Sensors

  1. Wearing the Voyager 5200, tap the call button to test sensors.
  2. To reset the sensors, power on the headset, connect the headset to your computer’s USB port for more than 10 seconds.
  3. You can disable your headset smart sensors through the Plantronics Hub software under the Settings.

How do I reset my Voyager 5200 headset?

Voyager 5200 Reset

  1. Unpair the Voyager 5200 headset from your cell phone.
  2. Power off your cell phone.
  3. Power on your cell phone.
  4. Re-pair the Voyager 5200 headset to your cell phone.
  5. Test the headset to see if that helped. If not follow the Voyager 5200 firmware update.

How do I update my rig 800?

1 Connect your adapter to your system.

  1. 2 Power on your PS4 and Check for updates.
  2. 3 Go to Settings > Devices > Audio Devices > Output Devices Select Plantronics RIG800XX.
  3. 4 Go to Settings > Devices > Audio Devices > Output to headphones > All audio.

How do I put my Plantronics Voyager in pairing mode?

Press and hold the Call button until you hear “pairing.” While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices. Select “PLT V5200 Series.” Once successfully paired, indicator lights will stop and you will hear “pairing successful.”

How do I pair my Plantronics Voyager Edge?

To do so:

  1. Power on your headset.
  2. Either:
  3. Activate Bluetooth on your phone and set it to search for new devices.
  4. Select “PLT_Edge.”
  5. If prompted to enter a passcode, enter four zeros (0000).
  6. Once successfully paired, you hear “pairing successful” and the headset indicator lights stop flashing.

How do I reset the sensors on my Voyager 5200?

If you don’t have your charging cable available you can also reset your sensors by first turning off the headset, then pressing and holding the Call and Mute buttons simultaneously until the LED turns off. Then put on your headset and turn it on.

How do you reset a Plantronics headset?

System reset procedures vary by Plantronics headset model. However, they generally include pressing and holding one of the headset’s buttons for several seconds, or holding the power button while connecting the AC power supply.

How do I Reset my Voyager 510 headset?

However, they generally include pressing and holding one of the headset’s buttons for several seconds, or holding the power button while connecting the AC power supply. To reset a Voyager 510 headset and certain other models, hold down the power button and the minus volume control button until the blue light disappears.

How to reset the battery of my Plantronics CS50 or CS55?

1 Unplug the AC power from your Plantronics charging base. 2 Remove your battery (CS70n, CS530, C053 battery can’t be removed) 3 Wait 10 seconds, then replug your AC power and battery. 4 Your Plantronics headset should now be reset and working Plantronics CS50 and CS55 battery replacement guide Plantronics CS351n, CS361n, C052, CS510,

What devices does Plantronics auto-diagnose on?

Automatically shows on-screen for iPhone and iPad. For Android¢ devices, use the free Plantronics app

author

Back to Top