Useful tips

How do I reset my ReadyNAS duo password?

author 0

How do I reset my ReadyNAS duo password?

Using a web browser, visit https:///password_recovery. > is the IP address of your ReadyNAS system. Enter the email address and password recovery answer you enabled on your ReadyNAS storage system and click the Reset password and email button.

How do I factory reset a ready NAS?

How to Factory Reset Netgear ReadyNAS?

  1. First of all, turn the ReadyNAS device off and locate the Reset button on it.
  2. Take a hold of a paper clip or pin-like device.
  3. Press and release the ReadyNAS Reset button using the pin.
  4. Now, power up the device and again press the Reset button.
  5. Let the lights on your device turn on.

Where can I find NETGEAR password?

the default wifi password would be on the bottom or back of the router in a label.

How do I retrieve my NETGEAR password?

How do I reset my NETGEAR account password?

  1. Launch a web browser from a computer or mobile device.
  2. Visit the MyNETGEAR portal.
  3. Select Forgot password?.
  4. Enter the email address that is associated with your MyNETGEAR account.
  5. Select the reCAPTCHA check box.
  6. Click or tap Reset Password.
  7. Enter the verification code.

How do I connect my Netgear NAS to my computer?

How do I direct-connect between ReadyNAS and PC/Mac?

  1. Assign a static IP address to the ReadyNAS, and set your PC with a static IP in the same subnet.
  2. Connect the ReadyNAS and PC NIC using a straight or crossover Ethernet cable.
  3. Power on the ReadyNAS and scan with RAIDar to locate the ReadyNAS.

How do I access ReadyNAS on my computer?

To discover and set up your ReadyNAS storage system: Visit http://readycloud.netgear.com on a computer that uses the same local area network (LAN) and Internet connection as your ReadyNAS system. Click the Start button under Set up a new ReadyNAS.

How do I factory reset my ReadyNAS duo?

To perform a factory reset, continue to hold the Reset button until all Disk LEDs flash twice (once at 5 seconds and then 25 seconds later), and then release the button.

How do I login to the ReadyNAS duo?

The ReadyNAS Duo login window displays. You will be prompted for your User Name and Password. The default user name is adminand the password is netgear1. See the “Using the Setup Wizard” on page 11 to continue configuration of the ReadyNAS Duo Setup Wizard.

How do I reset the password for my ReadyNAS account?

Enter the email address and password recovery answer you enabled on your ReadyNAS storage system and click the Reset password and email button. NETGEAR resets your administrator password and sends an email message with the new password to you.

How do I Reset my duo V1 or Duo v2 or NV+?

See How to tell whether I have a Duo v1 or Duo v2 or NV+ v1 or NV+ v2 1. Power down 2. Press and hold reset button with a paperclip 3. Press power button 4. Continue holding reset button till disk LEDs flash once (after about 5 seconds), then release.

What is the latest firmware available for the duo?

RAIDar picks up the Duo as having Firmware 4.1.14, probably the latest firmware available for this model. I really want to avoid bricking this unit as I know it should all be working, I’ve just forgotten the password (password reset was never configured so that option is not available).

author

Back to Top