Why are the lights flashing on my Hotpoint washing machine?
Why are the lights flashing on my Hotpoint washing machine?
End light flashing Indicates that the Hotpoint washing machine has reached the end of a wash programme. If the wash, rinse and spin function lights all flash at the same time, this would indicate a possible blockage in your filter or waste / drain pipe.
Where is the pressure switch on a washing machine?
The pressure switch on a washing machine can be found at the top of the machine, and it identifies how much water is in the machine – telling the control board if the machine has been filled or emptied.
What is F5 error in washing machine?
The F5 error code indicates that the Central Control Unit (main machine control board) detects a temperature sensor resistance that is out of the normal range. The F5 error is normally caused by a failed NTC temperature sensor.
Where is the water pump on a Hotpoint washing machine?
On this Hotpoint washing machine the drain pump is located at the rear of the machine. They are located at the bottom of ALL washing machines, however sometimes they are located at the front. In these instances access can be gained from the bottom of the washing machine.
What are the fault codes for Hotpoint Ultima washing machine?
Hotpoint WF & WD Ultima Series Washing Machine Fault Codes F01 Light No.4 Motor triac fault F02 Light No.3 Motor jammed or triac failure F03 Light No.3+4 NTC fault F04 Light No.2 Pressure switch stuck on empty F05 Light No.2+4 Pressure switch stuck on full
Is there a warranty on my Hotpoint washing machine?
No warranty is inferred, implied or given. Please understand that fault or error codes are not a “magic bullet”, they will not tell you what the problem is with your Hotpoint washing machine, they will only offer you an indication of where the problem lies and they are no substitute for good diagnostic skills.
What does EVO2 mean on a Hotpoint washing machine?
These Hotpoint washing machines and washer dryers use what they call the “EVO2” software and it’s these fault codes that we will cover in this article. These are the most common fault codes for Hotpoint washing machine models as well as other Indesit Group produced brands.
What does error F06 mean on my washing machine?
F06 — Door lock fault. Issue: Washing Machines door cannot be opened or closed / when the door is closed the machine the programme will not start. Advice: If your washing machines door will not close, please check for any obstructions in the door lock.
