What is the skirt on a hot tub?
What is the skirt on a hot tub?
The purpose of that flap, or what is also called the skirt of the cover, is to protect the outer acrylic lip of the hot tub from weather damage. The skirt works as a protective flap helping to prevent UV damage from the sun to the acrylic outer lip of the tub.
Can you take a hot tub apart?
If you plan on removing the hot tub because you want to move it to a new home, you might need to hire a professional. It can be time consuming to remove all the water from the unit and disassemble it properly. You don’t want to ruin the shell, skirt, or mechanical parts of the spa.
How do you unplug a hot tub?
Prepare Your Hot Tub for Safe Moving
- Disconnect the power supply. Locate the breaker switch inside the circuit box and turn it to the off position.
- Connect a hose to the drain valve.
- Open the spa drain valve to release the water.
- Use a wet-dry vac to clear the remaining water.
- Clean the spa.
Are all hot tub covers the same?
Well, not really. Most hot tub covers are created with the same basic structural concept, but there can be a world of difference from one to the next.
Are hot tub dimensions inside or outside?
It’s true! The height of the tub refers to the outer measurement—from where the hot tub wall meets the ground or deck, to where the wall meets the edge of the tub. The depth, however, measures the internal depth of the water in the area where you will be relaxing. So, what if you purchase a 36 inch hot tub?
Can you paint the exterior of a hot tub?
Exterior paint can give your hot tub a new lease on life, and you get to pick from dozens of colors. Customize your hot tub to match your patio furniture, or the trim on your house – the options are endless! You’ll need painter’s tape to prevent any paint from getting on the acrylic hot tub shell.
Can a hot tub be painted?
Keep your pools, hot tubs and fountains perfectly sparkling and inviting by choosing the right maintenance paint. The two most common types of coatings used for these types of applications are acrylic and epoxy pool paints.
Can you cut up a hot tub with a chainsaw?
Some people might recommend a chainsaw to cut up a hot tub, but a chainsaw isn’t a good choice of tool for this job. The chainsaw blade will end up getting chewed up.
How do you remove the bottom of a bathtub skirt?
Find a spot to insert a flat-head screwdriver near the bottom end of the skirt. Pry the bottom of the skirt away from the tub, using care to avoid scratching the bathroom floor. The top of the skirt unhooks from underneath the top tub lip as you pull the bottom. Remove the skirt from the tub completely.
How do you replace a skirt on a spa?
Just as you would use them on the bottom half of your dining room, you can apply this to the outside of your spa. Add a pressure-treated base board and moulding around the top and sides of each panel. Replacement Spa Cabinet Kits: Available in three colors, these kits are a quick solution for a long-lasting replacement spa skirt.
What is the purpose of a bathtub skirt?
Bath tub skirts are the decorative side panel of your tub, unless you have a one piece bath tub. Sometimes when working on your tub plumbing it is necessary to remove the tub skirt to access the drain and shut off valves. Removing bathtub skirts is a matter of locating the screws securing the skirt.
How do you remove the front panel of a hot tub?
If any screws are damaged or missing you can replace them with new screws that are designed specifically for your hot tub. The panel has the last screw removed and can be removed. Set the panel aside and lay it face up on cardboard or some other surface that will not scratch your panel.
