How much horsepower can you get out of a 390 FE?
How much horsepower can you get out of a 390 FE?
This is a blueprint for roughly 500 streetable hp. This block has been professionally prepped with a . 030-inch overbore, line honing, block decking, and lifter bore honing.
How much does a 390 engine weigh?
The new engine weighs a mere 39kg whereas the whole bike tips the scale at just 139kg (dry weight) which transforms to an impressive 340PS/Ton.
Are all Ford FE blocks the same?
Ford FE engine blocks used for performance builds are generally selected from one of three groupings: 390, 428, and 427. While other blocks are out there, these three are the foundation for the vast majority of high-performance street and track applications.
Can a Ford 390 be stroked?
Stealthy, invisible spine-decalcifying power comes from this Trans Am Racing stroker kit that gives the Ford 390 FE a whopping 4.250 inches of stroke in the middle of a 4.130-inch bore, translating to bone-crushing torque.
What does FE stand for Ford?
Ford Engine
FE (which means “Ford Engine,” not Ford-Edsel, nor Ford Engineering) variety comes from a broad selection of bore and stroke sizes to achieve cubic-inch displacements. The 332 and 352 are fraternal twins, virtually identical engines with 4.00-inch bores.
Is the Ford FE a good engine?
It was the most common FE engine in later applications, used in many Ford cars as the standard engine as well as in many trucks. It was a popular high-performance engine; although not as powerful as the 427 and 428 models, it provided good performance, particularly in lighter-weight vehicles.
How much does an FE engine weigh?
A Ford FE from the factory weighed 650 lb (295 kg) with all iron components, while similar seven-liter offerings from GM and Chrysler weighed over 700 lb (318 kg). With an aluminum intake and aluminum water pump the FE could be reduced to under 600 lb (272 kg).
What does FE stand for on a Ford engine?
Ford-Edsel
Is the 390 FE a big block?
The Ford 390 was a 6.4-liter (390.04ci) gasoline big block V8 engine that was produced between 1961 and 1976. The 390 was part of the Ford-Edsel (FE) engine family, which was produced from 1958 to 1976. The 390 is a torquey motor that’s still popular with performance engine builders.
How far can you bore a Ford 390?
Most 390’s can be bored safely . 080″ to 4.130″ which is standard bore for a 428. The cylinder walls should be “sonic mapped” to detect any thin areas due to core shift or corrosion.
What kind of engine does a Ford 390 FE have?
Ford 390 Specifications ENGINE FORD 390 FE BIG BLOCK CONFIGURATION BIG BLOCK V8 FUEL TYPE GASOLINE COMPRESSION RATIO 10.5:1 FIRING ORDER 1-5-4-2-6-3-7-8
What are the specs of a Ford 390 big block?
Ford 390 Specifications ENGINE FORD 390 FE BIG BLOCK COMPRESSION RATIO 10.5:1 FIRING ORDER 1-5-4-2-6-3-7-8 BORE 4.05 INCHES (102.87 MM) STROKE 3.785 INCHES (96.14 MM)
What is the difference between a Ford 360 and 390 engine?
The 360 and the 390 are marked with “352” on the block, which can be confusing given that the motors are based on the Ford 352 FE. Nearly all Ford FE motors carry the “352” casting mark on the block regardless of their actual displacement. The Ford 390 big block debuted across the Ford and Mercury line in 1961.
When did Ford stop making the 360 FE block?
Ford phased out all FE truck blocks around 1975-6 in favor of the “smogger” Modified (M) and Cleveland blocks. The Ford 360 FE was also very common in trucks, especially half-ton F100s across all trim levels. The 390 was available for the F100 into the 1970s, but it’s a relatively rare option.
