What does a dual saw do?

What does a dual saw do?

Dual Saw is the mighty saw with counter rotating blades – that’s 2 blades spinning at once, in opposite directions. It can tackle just about anything – iron, steel, wood, plastic, PVC and more, without you even needing to change blades.

What can you cut with a dual saw?

Dual blade saws are exceptionally good at cutting metal without the need for changing blades. These tools can cut stainless steel, galvanized iron, copper, tin, rebar, pipe, aluminum, and other types of metal.

Can you double blade a table saw?

A table saw with a short arbor may be able to accommodate just the two outer blades of a dado set, along with a chipper or two, giving you a 3/8-inch-wide to 1/2-inch-wide cut. But this doesn’t mean you’re limited to 1/2-inch dadoes. Can You Use an 8-Inch Dado Set on Your Table Saw?

Can you put an 8 inch blade on a 10 inch table saw?

As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.

What is an arbor on a table saw?

The arbor is the shaft that holds the blade. On all American stationary saws that use a 10″ blade, the arbor is 5/8″ in diameter where the blade is attached.

Are dado blades smaller?

Since dadoes rarely need to be cut deeper than about 1 1/2 inches, an 8-inch dado blade set will be large enough to cut most dadoes and rabbets. It stands to reason that the smaller-diameter blade set likely costs are a little less than a 10-inch set (since there’s less steel needed to build the blades and chippers).

What’s the difference between an arbor saw and a table saw?

Also known as the table saw, the tilting arbor saw is the single most important workshop tool for many. The tilting arbor saw, with its pulley and belt drive, usually allows more of the sawblade to be used. And, in general, it’s much quieter than the direct-drive motor-on-arbor saw.)

What is a dual saw used for?

DUAL SAW’s inverted rotation moves its two blades equally both forward and backward. Eliminate the usual kickback, vibrations and sparks that other saws cause. DUAL SAW’s professional lubricating system allows you to cut through soft metals like aluminum, copper and stainless steel without overheating or warping them.

What can the dualsaw cs-650 cut?

“I’ve never met anything I couldn’t cut”; that’s literally the slogan featured on the side of the DualSaw CS-650’s box. With its counter-rotating dual blade technology, the 160mm diameter blade system slices and cuts its way through almost anything; from wood, to copper, to PVC, stainless steel and more!

Is the dualsaw power tool from Harbor Freight reliable?

Don’t buy the Harbor Freight one, it’s a cheap copy – saw one of those “unboxing” power tool demos on YouTube and it burned up on the first use. The actual DUALSAW brand is pretty reliable. Use the code NOSHIP on the website to get free shipping, there are lots of promos on the Facebook page. A friend of mine has one.

Do dual-blades make precision cut easier?

The manufacturer claims that the dual-blade design reduces kickback force, spark output, and vibrations, making it easier to make precision cuts. Somehow I have trouble considering anything cutting with this wide a kerf “precision.” But not everything in the shop needs to be (or starts out to be) precision-cut.