Useful tips

How do I update my Parrot Rolling Spider via USB?

author 0

How do I update my Parrot Rolling Spider via USB?

Connect the Parrot Rolling Spider to your computer using a USB/micro- USB cable. > Wait until the left-hand light is a steady green. 3. Download the update file available in the blue box, to be found above this procedure.

Does the Parrot Rolling Spider have a camera?

Low-res built-in camera faces downwards. The Parrot Rolling Spider is a Bluetooth LE-enabled quadcopter you control with your phone. It’s the latest flying drone from the company that helped popularize smartphone-controlled copters for consumers with its AR Drone products.

How do you turn on a Parrot Rolling Spider?

Insert the battery into the battery compartment or tap on the On/Off button to switch on the Parrot Rolling Spider. The On/Off button is located under the Parrot Rolling Spider, below and to the right of the vertical camera.

How do I charge my parrot swing drone?

Charging is done with the included micro USB cable which can be connected to an existing USB power adapter or a port on your computer. The power switch is located on the bottom/belly of the drone.

How do I reset my parrot rolling spider drone?

Namon Black, try this which worked for me:

  1. remove the battery completely.
  2. plug the wire into the drone (no battery).
  3. plug the wire into the power socket.
  4. the lights should come on!
  5. plug in the battery while it’s still connected to the power.
  6. That’s it! It should now charge correctly. Score 0.

How much is the Parrot mini drone?

Check out the Parrot MiniDrone Rolling Spider from $20 – $35 on depending on your color choice.

How do I turn on my Parrot Drone?

Press the on/off button located on the back of the Parrot Bebop Drone to switch it on or off. > The led located on the on/off button lights up in green and the Parrot Bebop Drone omits a sound once it is fully booted and ready for use.

How do I reset my parrot swing?

To perform a factory reset of Parrot Mambo minidrone, perform these steps:

  1. Switch On the Parrot minidrone, and wait for the LEDs to turn green.
  2. Press the Power button again and keep it pressed for about 30 seconds.
  3. Clear the memory of the minidrone (see Troubleshooting by Clearing Parrot Minidrone Memory).

author

Back to Top