What is machinery space in ship?
What is machinery space in ship?
On a ship, the engine room (ER) is the compartment where the machinery for marine propulsion is located.
How does air flow into machinery space?
The hot air rises in the centre and leaves through louvres or openings, usually in the funnel. The machinery control room, as a separate space, may well be arranged for air conditioning with an individual unit which draws air through trunking from the outside and exhausts back to the atmosphere.
What are hazards working around engine machinery space?
The Club advises operators in engine room to be aware of the following ten hazards: Dust bin with overflowing oily rags near a hot running engine. Missing section of handrail, chain left hanging. Load on the chain block exceeds the safe working load.
What is machinery space category A?
‘Machinery spaces’ are all machinery spaces of Category A as defined in 1981 SOLAS Amendments and all other spaces containing propulsion machinery, boilers, oil fuel units, steam and internal combustion engines, generators and major electrical machinery, oil filling stations, refrigerating, stabilising, ventilation and …
What is unmanned machinery space?
UMS
– Unmanned machinery space (UMS) – Machinery spaces that are controlled from the bridge rather than from a control room located within the engine room compartment.
What are various items of machinery and equipment found outside machinery space in modern ship?
The various items of machinery and equipment found outside of the machinery space of modern cargo ship. These include deck machinery such as mooring equipment, anchor handling equipment, cargo handling equipment and hatch covers.
What is bilge well?
1. bilge well – (nautical) a well where seepage drains to be pumped away. sailing, seafaring, navigation – the work of a sailor. ship – a vessel that carries passengers or freight.
What is the common accident in engine room?
Explosion of ship’s crankcase is one of the most dangerous accidents in the ship’s engine room which has led to devastating consequences, including loss of lives in the past. In the engine crankcase, oil particles are churned into smaller particles of up to 200 micro meters in diameter.
What is manned machinery space?
Machinery space means any space which contains propelling machinery, boilers, oil fuel units, steam, internal combustion engines, generators and major electrical machinery, oil filling stations, refrigerating, stabilizing, ventilation and air conditioning machinery, and similar spaces, and trunks to such spaces.
What is an unmanned machinery space?
– Unmanned machinery space (UMS) – Machinery spaces that are controlled from the bridge rather than from a control room located within the engine room compartment.
What is the meaning of “machinery space”?
machinery space means a space on an installation where equipment incorporating rotating or reciprocating mechanical equipment in the form of an internal combustion engine, a gas turbine, an electric motor, a generator, a pump or a compressor is located; (zone des machines)
What are the requirements for periodical unattended operation of a machinery space?
For periodical unattended operation of a machinery space, all controls and safeguards necessary for centralised control are required, but safety actions must be automatic. In addition, it is necessary to extend the machinery space alarm system to the bridge and accommodation areas so that engineering personnel are made aware when a fault occurs.
Why is it necessary to extend the machinery space alarm system?
In addition, it is necessary to extend the machinery space alarm system to the bridge and accommodation areas so that engineering personnel are made aware when a fault occurs. Control of propulsion must also be extended to the bridge to enable the navigating officers to carry out manoeuvres if the need arises.
Why are girders provided in the machinery spaces of ships?
D.J. Eyres M.Sc., F.R.I.N.A., G.J. Bruce M.B.A, F.R.I.N.A., MSNAME., in Ship Construction (Seventh Edition), 2012 It has already been indicated that in the machinery spaces additional transverse floors and longitudinal intercostal side girders are provided to support the machinery effectively and to ensure rigidity of the structure.
